The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   Cannot open drivers door from inside (https://www.the75andztclub.co.uk/forum/showthread.php?t=306137)

Sumosteve 4th July 2020 16:47

Cannot open drivers door from inside
 
Hi Guys,
Drivers door won't open from inside. Have to wind down window and use outside handle. No resistance felt at all when pulling inside handle.
Any ideas anyone please ?

suzublu 4th July 2020 17:17

The cable might've come off the hook, pop the screw cover off and remove handle, you should see the hook. If it's broken, then door card off to repair/replace:cool:

Sumosteve 4th July 2020 17:56

Thank you for quick response. I will take a look.

Sumosteve 4th July 2020 19:05

Quote:

Originally Posted by suzublu (Post 2822898)
The cable might've come off the hook, pop the screw cover off and remove handle, you should see the hook. If it's broken, then door card off to repair/replace:cool:

Correct 🙂
Yes, the hook is broken right at the end. Is there a bodge one can do ?? Glue ?? Looks like it's a plastic hook ? Thanks
Alternatively is replacing the wire a big job ?

suzublu 4th July 2020 19:23

There is a fix using a cable ring connector, hang fire I'll take a look:cool:
Here it is, you might have to contact Steve (Arctic) for the pics https://www.the75andztclub.co.uk/for...d.php?t=122319

Sumosteve 4th July 2020 21:53

Quote:

Originally Posted by suzublu (Post 2822914)
There is a fix using a cable ring connector, hang fire I'll take a look:cool:
Here it is, you might have to contact Steve (Arctic) for the pics https://www.the75andztclub.co.uk/for...d.php?t=122319

Much appreciated. Thank You. I presume the lever and it's backing has to be pushed back in from the rear because I cannot get it all in pushing it in from the front while the door is completely intact ??

Arctic 5th July 2020 00:39

Hi Steve you could try this below.

Purchase a curtain hook, and also use an electric connector fig 1
https://i.imgur.com/u4jKGNVl.jpg1

screw the curtain ring into the connector, and then crimp it.
https://i.imgur.com/mEh08pdl.jpg2

Push the door cable into the other end of the connector and crimp, open the curtain hook and put it through the door handle puller
https://i.imgur.com/yKTNCWnl.jpg3

Close the hook bac up and put wire through the slot in the handle.
https://i.imgur.com/VDN5c3El.jpg4

These are what i use.
https://i.imgur.com/sY54h1Bl.jpg5

I made a few up recently in hope we may have a Nano meet in the near future :eek:
https://i.imgur.com/T1szLHQl.jpg6

Alternatively you could use a chock block and some wire as below.
https://i.imgur.com/FODzN3ul.jpg7

https://i.imgur.com/o9tCdEkl.jpg8

Originally i used and earth connector

https://i.imgur.com/T2jYHZZl.jpg9

https://i.imgur.com/mCeuyEXl.jpg10

https://i.imgur.com/Gd7KxdIl.jpg11

https://i.imgur.com/HC6ayQPl.jpg12

https://i.imgur.com/nuvUv57l.jpg13

a few ways there for you ;)

Sumosteve 5th July 2020 05:35

Brilliant, Thank you.
Having unscrewed the drivers inside door lever and taken it out, I am now having trouble putting it back in!!!
Will it just push in from the front ?? Thanks

whynothot 27th August 2020 21:43

Me too!!
 
Hope this fix works as my internal drivers door handle broke today. Great to see all the info as ever :}

inzer 3rd September 2020 02:02

Hi colleagues, how do I open the right back door if they can't open from either side? Thank you for the advice.


All times are GMT. The time now is 09:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd