Headlight washers
Hi
I'm looking for a complete headlight washer set up to include bottle with two pumps the hoses etc etc The wiring with plug is there but all I have at the moment are the bumper nozzles. It's for a facelift ZTT if it makes any difference Ta Ian |
Well there is this but it is MK1 so would need adapting a little but in if you can get the mk2 jets the rest of it could be purchased separately ( use existing bottle, drill new hole in it), fit grommet and bmw/rover headlight pump then all you need is hose, NRV tee.
|
got the Mark one pipes, nozzles and tee piece here Ian
Mind you Head Light washers , very overated :D:D:D |
Is the wiring there for it?
|
Quote:
As I say in my opening post I have the wiring and the mk 2 nozzles in the bumper just need everything else to fit it to my faceift ZTT. Cheers |
Quote:
But needed by law on xenons I believe.😁 |
With xenon's. Factory fit. Has to have self leveling and washers
But if retro fitted. You do not need to have either :D Just going to retro fit xenon's on the 260 ;) |
It used to be that IF they were fitted then they have to work. Now, I'm pretty certain that the current MOT requirement says the tester has to only test them on post 2005 ( or 9, cannot remember:o) cars. So, they don't even have to work if fitted prior to that!!
|
All times are GMT. The time now is 05:49. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd