The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   Lower mount labour charge? (https://www.the75andztclub.co.uk/forum/showthread.php?t=291434)

Dawn 30th December 2018 10:23

Lower mount labour charge?
 
How much is a fair price to change Blue's lower mount? I have the part so labour only? When I had the black V6 done it took 40 mins and cost £40. I have lost the chap's number and have just been quoted 2 hours £70 which seems a lot and 2 hours??!!!! Err I dont think thats right!

mininuts 30th December 2018 10:31

The biggest job is jacking the car up to gain access! Ten minute job once car is in air.
2 hours does seem excessive, especially if they’re doing it on a lift :shocked:
I’m sure an hours labour is more than long enough to complete the job.

STUBIE 30th December 2018 10:42

I got quoted an hours labour and £70 plus vat for changing the reverse switch on a gearbox.

Needless to say I got it done elsewhere.

I think they make it up as they go along.

Stubs

bluebird 30th December 2018 10:48

Thats very expensive Dawn, a good garage will have it done in less than an hour and that includes removing and refitting the undertray!

Dawn 30th December 2018 12:11

Quote:

Originally Posted by bluebird (Post 2698230)
Thats very expensive Dawn, a good garage will have it done in less than an hour and that includes removing and refitting the undertray!

I wish you and Andy were closer! So hard to find fair, decent garages.

Phil-T4 30th December 2018 13:54

FYI the official book time is just under 30mins (0.45Hr) which includes undertray removal/fitting.

Dawn 30th December 2018 14:44

Quote:

Originally Posted by Phil-T4 (Post 2698309)
FYI the official book time is just under 30mins (0.45Hr) which includes undertray removal/fitting.

Which is what the previous mobile guy took. Smashed my old phone and lost him though :(

macafee2 30th December 2018 14:59

Dawn, what have you in respect of tools, ramps and a palce to work?

Are we talking a diesel lower mount? The one that looks like this?
https://www.banggood.com/Metal-Manua...r_warehouse=CN

macafee2

planenut 30th December 2018 15:18

Dawn, sometimes they haven't a clue as they may have not worked on our cars before. You could tell them to reconsider, if you have no other option than using them.

KeithA 30th December 2018 17:05

If it's diesel I did mine in about 30 mins on the drive......

Sent from my Redmi 5 Plus using Tapatalk


All times are GMT. The time now is 08:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd