The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)

- Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)

- - lower grill (https://www.the75andztclub.co.uk/forum/showthread.php?t=313489)

drewbie

12th June 2021 11:33

lower grill

Hi, can the black grill below the front number plate, that encompasses the fog lights, be clipped off for cleaning (cant see any screws).

sammy1957

13th June 2021 11:28

https://uploads.tapatalk-cdn.com/202...53b5f96d11.jpg
https://uploads.tapatalk-cdn.com/202...e142792bda.jpg
https://uploads.tapatalk-cdn.com/202...bf21ba34f2.jpg
https://uploads.tapatalk-cdn.com/202...2a6d7a6629.jpg
https://uploads.tapatalk-cdn.com/202...9e1e905d23.jpg
https://uploads.tapatalk-cdn.com/202...3a7177b74e.jpg
https://uploads.tapatalk-cdn.com/202...ff37427808.jpg

Sent from my iPhone using Tapatalk

sammy1957

13th June 2021 11:31

Quote:

Originally Posted by drewbie (Post 2886083)

Hi, can the black grill below the front number plate, that encompasses the fog lights, be clipped off for cleaning (cant see any screws).

Would be a lot easier to drop the front bumper to release the middle grill !

Sent from my iPhone using Tapatalk

Howard81

13th June 2021 15:25

I replaced mine recently as it was cracked, it does just unclip but you do need access to the back of the bumper. However the wire mesh part is fused into the front bumper moulding.

YMGF	17th June 2021 18:26

IIRC you have to remove the fog lamp surrounds first as they hold both ends of the grille.
As mentioned above, the mesh is welded into the plastic grille but I removed mine as it was damaged and replaced with some stainless steel mesh, held in place with self tappers and washers.

All times are GMT. The time now is 23:33.