Some nice bits and bobs!
7 Attachment(s)
Delivery to mainland UK only.
Diesel intercooler hose, three part replacement, two part silicone one part stainless, with the stainless elbow in the middle. £25 delivered. NOW SOLD F&F PCV filter replacement, £10 delivered.NOW SOLD Full set of four electric window switches with white LED conversion, £20 delivered. NOW SOLD Pair of ZT-T rear light clusters, good condition, couple of the usual minor marks on the lenses that will likely polish out. Brass nipples are present and intact, outer fixings are in need of washers as per usual, apart from one intact. £60 delivered. NOW SOLD Tourer rubber boot liner, aftermarket, well used but still plenty of life left and does the job really well! £15 delivered. NOW SOLD Dials, with info screen, has white LED conversion done by Klarzy some time ago. Mk1, diesel, manual, but can obviously be converted to whatever spec is needed. Digital speedo enabled, delined about a year ago by Phil T-4, still no lines present warm or cold. Only problem seems to be that the internal PDC sounder has given up the ghost. £20 delivered. NOW SOLD Set of four rubber floor mats. Front two are MG branded, rear two are Rover, good condition, OSF is more worn that the others as you'd expect, MG logo has started to separate from base, but loads of life left. £15 delivered. NOW SOLD Modified handbrake compensator £10 delivered. EGR blank, unfortunately not the stainless steel one. £15 delivered. Ford washer jets, much nicer mist effect rather than two streams/jets. Little rubber gaskets have had it but they work fine, £7 delivered. |
7 Attachment(s)
Some more pics
|
7 Attachment(s)
Few more pics
|
Bump, original post updated and couple of new items added.
|
Got a pic of that Diesel intercooler hose please Tom?
Thanks. |
3 Attachment(s)
Quote:
|
Bump on remaining items
|
Another bump
|
1 Attachment(s)
Quote:
By any chance do you have one of these (off a 2004 Facelift) Attachment 78590 For fastening they have two inboard threaded metal studs for regular nuts and outboard, two plastic pins that take an approx. 5mm self-cutting quickthread nut. The exterior chrome needs to be in good condition and the plastic studs need to be intact. If you've got one let me have an idea on price. Cheers John |
All times are GMT. The time now is 05:02. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd