Clarion patch lead
 

This is a long shot but does anyone on here have a Clarion patch lead. Part number PC99-CLA. If so would you be able to take a close up photo of the wiring block from the front to the rear so I can rewire mine please.

Is this the part you are trying to install.


http://www.ebay.co.uk/itm/ROVER-75-S...-/280850940124

Have the wires come off the Clarion plug or are you trying to alter the wiring ?

Have a look on the Autoleads site.

Dave T

Its this lead

http://www.dynamicsounds.co.uk/oscth...e391bb182250dc

the one that goes into the loom with the ISO blocks either end. I have the Sony version and I'm trying to rewire it to the Clarion version ( well I am a tight ar** from yorkshire lol )

Well, good luck with that..

Not many Clarion head units used on this forum.

Your picture shows your unit is for the steering wheel controls.

Autoleads site might be able to help. It's tricky altering plug wiring, could do your set dammage if you get it wrong.

My advice is to get the correct lead.

Dave T

I found this image on google

http://ecx.images-amazon.com/images/...L._SL1500_.jpg

which by all accounts is for the PC99-CLA ( http://www.amazon.co.uk/Autoleads-PC...N%3DB004TW7Y5E

So I dug out my molex kit ( it has the proper pin removal tool for when I am sleeving PC power supplies ) Changed the pins over wired it into the car etc and still no joy so Im starting to think my controls are borked.

Not worth trying to re-wire, as Dave has said

Only cost around £5

http://www.dynamicsounds.co.uk/advan...x=0&search.y=0

Stu

Does this help.....

http://i1110.photobucket.com/albums/...d.jpg~original

http://i1110.photobucket.com/albums/...e.jpg~original

The PC99-CLA plugs in to a connector on the PC99-X32 adapter lead, not the ISO connector, you can see it at the picture.

http://www.dynamicsounds.co.uk/oscth...145c91ba7c8801