lower arm to hub pinch bolt 65Nm?
 

I don't understand the description in the Haynes manual but checking Rave I think I have the answer but can you confirm?

Lower arm to hub pinch bolt = 65Nm

Rave and Haynes say 45 but I'm sure here, we are advised 65

macafee2

I think this post will be helpful ….
https://www.the75andztclub.co.uk/for...ght=pinch+bolt
Many of us have found it necessary to increase the torque to clamp the pin adequately .

Start with 45Nm Ian and if there is no play then leave it at that. If you can feel any play with a pry bar then go up in 5Nm increments until it is rock solid. From what I remember 65Nm is a safe enough limit.