The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Double Din Navigation Systems (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=92)
-   -   75/ZT In Car System with GPS DVD Plug and Play (https://www.the75andztclub.co.uk/forum/showthread.php?t=58455)

tony_fry 15th April 2010 08:37

Quote:

Originally Posted by picky747 (Post 507998)
It tells you on page 6 of the manual as confirmed by paulads.

Always pays to read the manual!!!! :} :} :}

Jakg 15th April 2010 10:33

Can you use this with Bluetooth for calls?

tony_fry 15th April 2010 10:41

yes it can be used to receive calls, but you have to dial the number via the on screen display or directly on the phone, it does NOT have a phonebook connection

peterv6 15th April 2010 10:54

Quote:

Originally Posted by picky747 (Post 507998)
It tells you on page 6 of the manual as confirmed by paulads.

Thank you!
I'll check the manual first the next time.:o

italianstallion 15th April 2010 20:19

Anyone know how to stop the unit defaulting to playing the sounds of another mode when the GPS is on, i.e. radio in the background.

When I use GPS, I'm just wanting the sat nav software sound only no other modes or devices playing. This is because I'm getting a static noise on other modes playing such as TV, Aux, etc.

picky747 15th April 2010 20:40

Quote:

Originally Posted by italianstallion (Post 508386)
Anyone know how to stop the unit defaulting to playing the sounds of another mode when the GPS is on, i.e. radio in the background.

When I use GPS, I'm just wanting the sat nav software sound only no other modes or devices playing. This is because I'm getting a static noise on other modes playing such as TV, Aux, etc.

Go into the main system setup menu and select System,then on the basic tab it says GPS Listen,tap the icon so it turns grey and you are done.

tony_fry 16th April 2010 12:20

Tomorrow should be "D" for Radioguy to start sending our the new release of Head units.

How many members have ordered the "new" ones with RDS and hopefully TMC?

Mannie 16th April 2010 12:21

Help Needed,

I am about to get round to trying to get the TV side work so here are two issues i need help on

1. What is the TV standard setting I need for the UK

2. The chap who tried to install this has put the DBtv unit behind the glove compartment is there any one who knows how to remove this so I can get the new aerial plugged in.

Thanks in Advance

tony_fry 16th April 2010 12:27

1:- We use PAL in the UK
2:- Depending on where the DVB-T is located, it might be just under the glove box or on top of the grovebox, it its mounted below the glovebox just a simple matter of removing the fuse panel below the glovebox, if its mounted above the glovebox, it means removing the glovebox which is held in with Toque screws.

Radioguy 16th April 2010 12:55

TV Modules
 
Hi Guys
I received word (While I was asleep) that the units were produced and we will have them Tomorrow.
But there is a glitch as always
I am waiting for your feedback and will be sending individual emails to know your wishes.

Here is the email from my agent.....

We got situation.
Factory just called us regarding to MG production.
They said after adding RDS module, the memory is not enough to support built-in analog TV
They must remove the built-in TV.
While the same time, they suggest we use built-out DVB-T box, this affect nothing.

Please advise URGENTLY as they plan the production in few hours.


All times are GMT. The time now is 14:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd