Temperature gauge and rev counter stopped working
The temperature gauge started to go eratic, then stopped, then the rev counter stopped. I clean the plenum behind the dash regularly, through the hole I made from directions in the forum. All the fuses are fine, any ideas guys
Sent from my SM-T580 using Tapatalk |
I had this after I took the IPK out and when I refitted it the connector behind the fuel gauge had not been fully secured.
|
Quote:
Sent from my SM-T580 using Tapatalk |
Quote:
There may be other causes of your problem, I am sure others will be able to offer advice. |
Quote:
According to RAVE, this means that the CAN bus link between the ECM (Engine Control Module) and IPK (Instrument Pack) is faulty. Simon |
Quote:
Sent from my SM-T580 using Tapatalk |
Check my thread HERE
I have the same problem. |
Quote:
Brian :D |
Quote:
Sent from my SM-T580 using Tapatalk |
Quote:
The offending part is easy enough to remove and pop into a jiffy bag, and a special delivery via the post office will see you back in business in three days total, so posted on a Monday, you'll be up and running on Wednesday. Let me know if you need any more info. Brian :D |
All times are GMT. The time now is 14:59. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd