T4 cablecheck or DTC0058A schematic?
I am trying (and failing) to connect my T4 to an MGF airbag ECU.
It won't recognise my grey cable as being valid. I am told that this is because I don't have a DTC0058A adapter between my extension cable and the grey lead. I don't have a DTC0058A. Can anyone on here either tell me what's inside a DTC0058A, or tell me how I can modify my T4 to ignore the cable check bit which (I think) would allow me to use the grey cable without the DTC0058A? My grey cable works on a Freelander alright. thanks, Philip |
All the adapter does is to put a 100K resistor across pins 6 & 11, no changes to the cable wiring.
|
Thank you Phil
|
I'm afraid that I can't get this to work.
A grey cable 75k ohm also across pins 6 and 11. I have tried only 100k ohm across ping 6 and 11 with all the other pins as per a grey cable, and I have also tried 100k ohm and 75k ohm in parallel across 6 and 11, which is what I thought you meant. This is basically a grey cable with 100k and 75k in parallel instead of just 75k. Also the T4 changes its mind. The first screen specifies extension DTC4007B + adapter DTC0058A + grey DTC0064A http://www.christiantena.net/images/DSC_4274.JPG but when that fails it changes its mind and asks for extension DTC4007B + grep DTC0064A. The requirement for DTC0058A has gone! http://www.christiantena.net/images/DSC_4275.JPG |
I got it working. Thanks, Philip
|
Can you tell me how you did it? Planning to build the adaptor myself. Sounds like it could be done.
|
Hi - just a bump - alos looking to understand how this adapter is constructed if anyone can help
|
All times are GMT. The time now is 15:37. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd