Rear sunblind
 

hello, to add a rear sunblind on a rover 75 is it necessary to reprogram the ZCS codes for it to work?
Thank you for your answers and leave for my bad English:}

no, just need to plug it in (if the wiring is there) including the switch. Press the switch and it should work.

Mine didnt work all of the time, I replaced the motor, as this can fail (magnet falling off the shroud). My main problem was the shelf was not bolted down from under the parcel shelf (access in the boot). Once tightened up, it worked more often. Then sprayed the mechanism with silicone lubricant and since then it works all the time.

ok thank you very much that's nice:}

be careful when removing the parcel shelf not to pull any wires off of the rear screen

macafee2

thanks for the advice