Mot failure
Hi Everyone
Well my 2002 Rover 75 failed its mot today on nearside and offside rear upper suspension arms rotten and one spring,But i will replace both springs at the rear while im doing the job. Where is the best place to buy the arms and is there other parts i need to order ?Also any tips to do this job please. Cheers julian |
When I renewed my arms, I found it way easier, after seeking advice on the forum, to drop the entire rear sub frame after disconnecting everything. In the end, as everything was rotten, i managed to source a great condition subframe complete with all the arms, used but like new. However, getting the bolts out of the rose bushing things that connect the upper arm to the hub was the real pain as mine had rusted in. Good luck. :)
|
Quote:
20 years back I would have been underneath and had a go, but not now. The guy who has taken mine on is going to strip out and replace all. Hope you can get her sorted, few and far between now. Regards, Dave. |
Quote:
You will need a short extension, about 100mm to get to the two inner bolts and a "deep" 18mm socket to get to the nut at the hub. As for where to buy the arms.... I wonder if the replies will be a can of worms macafee2 |
Dmgrs have got the arms but checking their description and pricing leaves me very confused.
RGG104972 described as XPart is £119.99 RGG104962 described as SAIC. Is £79.99 The picture appears to be of the infamous Indian ones (XPart), so why should they be more expensive when their quality is to put it nicely “questionable” ? Regards |
Just undo the arb from both drop links, then you can get the springs out and in without a spring compressor. That is before you start on the upper arm and lower arm bolts Jack both sides up and on axle stands first..
|
Quote:
macafee2 |
Cheers Everybody for all the advice,im in 2 minds with weather to scrap my old faithfull as i can see me spending about £400 just on parts alone and thats if i can manage it on my back in the street which is not ideal.
Its a shame as its a good car and i fitted a new clutch myself a few years ago and done most jobs that needed doing. the other failures were a track rod end and nearside parking brake inoperative ?other job is slight blow on exhaust backbox but didnt fail it. think i need have a good think before i make a decision. Cheers chaps |
If i do decide to do it what colour springs do i need to order as the sticker under my seat is very faded all i can make out at the bottom of sticker is PK JK and G .
thanks julian |
Rimmer's have a good guide here: https://rimmerbros.com/content--name...le-Information
But I'm not sure that all types are still available and prices for OEM are higher than other suppliers. Just before Christmas EuroCarParts had a sale on front springs (Anschler) I bought two pairs for our "fleet", think they were about £8 each! Now the price is £56. CarParts4Less (their cheaper sister company) are worth checking. Depends if you want original or accept aftermarket, don't really think it makes much difference as long as you fit in pairs. I went to the trouble a couple of years ago of buying Swedish Lesjöfors springs in the hope they'd last - one broke after two years (got a refund after a six month wait). Regards |
All times are GMT. The time now is 01:53. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd