leaking hose
Please can someone tell me what this hose is for and where to get a replacement, it's connected to a metal box on the right hand side of the oil filter going to the engine, it's about 10in long 1in diameter and L shaped, it's leaking. not even sure what it's leaking out, the fluid is oily and clear, it could be oil I cant remember if I put new oil in before it was on sorn 2 years ago. Thanks Dave.
|
Quote:
Can you post a photo Dave, what car is it, what engine ? |
Sorry been away a long time, MG ZT-T 2.0 cdti 2005 BX54 RPY I don't know how to post pictures, and need to take off engine cover and have no tools,
|
Quote:
Can you see the hose in the photo below. https://i.imgur.com/LjzmJJ6l.jpg1 PS try and get your self a cheap set of sockets you need 8mm for engine cover bolts which there are three of which you most likely know anyways. https://i.imgur.com/9X7JaRXl.jpg2 https://i.imgur.com/vC4oyZVl.jpg3 It maybe this hose in the diagram on Rimmers. https://rimmerbros.com/Item--i-GRID001722 https://rimmerbros.com/Item--i-PEH101300 Coming from the oil cooler into the coolant pipe. |
Hi Steve, that’s the one thanks. Don’t know if you remember me I came to you many years ago to replace my fan assembly. Poor car has been sat on my sisters drive for 2 years cos of COVID.
|
Quote:
Yes i remember, if you can check and feel round the hose to see if it secure, the hose should only have coolant passing through, even though it's joined to the oil cooler, which as different chambers inside sometimes the seals inside can fail and then you get a mix of of coolant & oil together, when completely failed you would maybe see some light gunk on the header tank cap, as in the link below hopefully it's not got to that point. http://www.75ztcommunity.co.uk/oil-c...0cooler#p88153 |
Both joints feel ok, header tank is clean, I don't wont to run the engine until I fit new pipe, on it's way from Rimmers. Just now the alarm has started going off for no apparent reason shortly after locking!
|
Quote:
|
Hope that's the only revenge, I opened and closed all the doors and bonnet and it seems to have settled down.
|
New pipe arrived today, I bought cheap socket set from argos and changed pipe. Disaster! it's not the rubber pie that's leaking it's coming from the metal pipe it's connected to, seems like it's the joint where the small elbow is welded.
|
All times are GMT. The time now is 11:10. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd