rover 75 video module
hi to all
the video module fitted to my rover 75 highline started to play up so I bought another land rover l322 yil000322 037138080 unit which was a widescreen unit now the old unit I had when you had the unit in tv mode the tv went off when you released the hand brake but the new land rover unit when you release the hand brake the tv does not go off what is the difference between the two units david |
Seem to remember it is not only handbrake off but speed sensor related too?
|
There used to be a setting that you could change on the earlier units that was accessed on the head unit.
Remember changing it on mine so the TV would work all the time ;) Russ |
yup thats right. I still have my old one somewhere, and the procedure to alter it somewhere
|
hi to all
found this on the internet Set ignition to position II Enter t.v mode Enter settings Enter contrast or brightness When the green contrast bar is visible, push the knob and keep it pressed Turn ignition off (keeping button pressed) Wait 8-10 seconds( timing MUST be accurate) Release the knob Turn on the ignition again Now you can watch t.v while driving ( But only for passenger use!!!!! ) tried it but did not work after trying it I thought that maybe it does not work with the mk4 dvd unit I shall try the mk3 to see if it works |
Quote:
|
hi to all
found information on the internet you can unlock the tv but you need a nav decoder software and k bus interface to do so the software navdecoder I have downloaded and tried and under navigation you can select r40 r75 so it must work on the rover 75 david |
Do you have a digital tv tuner installed? otherwise what are you watching after unlocking?
|
hi to all
yes I do have a digital tv and radio one I converted my self bought the ptv board and tuner from a company from china and the simplest video unit to convert is the video unit with the ribbon and not with the tuner soldered directly to the mother board the tuner also has a k bus bought the parts from aliexpress it works out cheaper than buying one from carphonics david |
Quote:
That Sounds very interesting, is there any chance of a "How to" or a list/link of components to carry this out? Thank you. Paul |
All times are GMT. The time now is 14:21. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd