Plenium drain rubber cap drivers side
 

Hi guys do anyone know where I can get the drivers side plenium drain rubber cap from I lost mine while cleaning out the drains:duh:

If you need a plenum tube to fit underneath the ECU, drop me a PM I’ve got a few in stock
Mick

Plenum drain plug cap
 

Hi thanks for your message but I need the rubber grommet that fit where you unblock by the brake fluid top up bottle on drivers side the rubber closed grommet that covers the hole

Hi Christopher.
I presume you are referring to the inner wing drain tube, blank grommet, you should be able to get one from Halfords i think it is 25mm but even better if you added the drain tube it's self ;)

https://i.imgur.com/U2eIH82l.jpg1

https://i.imgur.com/fgfVKnNl.jpg2

add some fish tank round filter to stop the debris going in after.
https://i.imgur.com/APWYKBSl.jpg3

[QUOTE=Arctic;2848253]Hi Christopher.
I presume you are referring to the inner wing drain tube, blank grommet, you should be able to get one from Halfords i think it is 25mm but even better if you added the drain tube it's self ;)


Fully agree. The blanking rubber was purely a cost cutting measure during the dreaded Project Drive period of MGR. If you can get hold of the drain rubber and fit it you will be helping to protect your car far more than just a rubber bung.

The deletion of the offside upper drain tube is apprently based on the logic that the hole is higher than the route taken by the water. Wonder if that's so?

TC

Offside plenum drain rubber tube
 

Hi as anyone got one of these cant seam to find one anywhere.