Hot air fine when moving, but cool stationary?
Hi all.
Got a perplexing problem at moment, especially with winter coming. I have a R75 Connie 2.5v6 petrol auto. It's had a replacement stat a year ago, no leaks or drop in coolant level, but my mechanic fixed a leak from the short straight plastic pipe a few months ago. I think he put some kind of rad fix solution in, which I wasn't happy about. After that I had no hot air. I asked him to flush out all the coolant and replace, and while at it flush out the matrix. Since then coolant seems fine, no loss, and car runs fine, but hot air is fine when car is moving forward but as soon as you stop, (with engine running) the cabin air drops to just barely warm. Start moving forward and goes hot again??? When running the engine runs at around 81° which I know is a bit cool, but the hot air is fine when moving. Air con was degassed and checked about six months ago. Any ideas? Thanks |
When you say " but hot air is fine when car is moving forward but as soon as you stop, (with engine running) the cabin air drops to just barely warm. Start moving forward and goes hot again??? "
I presume you have the heater fan running at a reasonable speed both when moving and when stationary ? |
You have an airlock!!!
|
Quote:
That's my first thought too. There's a specific procedure for refilling and bleeding the KV6. How handy are you with the spanners Darren? Oh, and steer clear of that mechanic. Putting sealing potions in the coolant can, and has caused catastrophic long term problems. :o Simon |
Quote:
|
Quote:
What's annoying is I asked him to do a coolant system flush and refill, and and assume he would follow rover procedures. Do I need to empty it again and refill, following rover kv6 procedures? |
Quote:
|
Quote:
Unfortunately garages are under pressure to work as quickly as possible so don't have the time to look through workshop manuals for any special requirements, particularly when those manuals were, as in MG Rover's case, on CD ROM. Please keep us updated! :} Simon |
People who are smarter and more experienced with the 75 than I say an airlock is the likely culprit. Who am I to argue with that? They're probably correct.
The one other thing that comes to mind, though, is the possibility that the heater core (matrix) may still be restricted with the remnants of the goop that was put in to fix the original leak. That stuff is just evil. Some heater cores have smaller passages than radiators. I'd be prepared for another flush - maybe even just the core through the heater hoses and with a cleaning agent or vinegar or something. If the drain/refill process doesn't do the job... Good luck, Glenn |
Quote:
Quote:
Simon |
All times are GMT. The time now is 06:37. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd