front door pillar finishers
help anyone needed both front door pillar finishers both mine have deteriated that bad:(now sorted thanks rotrex
|
passenger was available new from rimmers drivers side is not scrap yard or trader on here
|
Quote:
|
Mick. I think op is refering to the outside finnishers ;)
ROY. yes this is connon mate as I sell a lot for that very reason;) |
is that the black trim next to the glass because can you get them for the tourers on the rear window between the two pieces of glass as both our tourers have blisted there
|
yes its the exterior black strips that i need
|
Quote:
|
Quote:
http://i54.tinypic.com/bhioeb.jpg |
Quote:
how are they held in place |
Quote:
Once you have sourced them fig 1 http://i54.tinypic.com/bhioeb.jpg1 Window down then look behing the rubber channel fig 2 http://i51.tinypic.com/ngyhcw.jpg2 You will find three screws top middle and bottom fig 3/4/5 http://i51.tinypic.com/16jlr7n.jpg3 http://i52.tinypic.com/2lv1klz.jpg4 http://i53.tinypic.com/2ah64ci.jpg5 Once you have removed the three screws peel back the rubber fig 6/7 http://i52.tinypic.com/2hd4e88.jpg6 http://i52.tinypic.com/2ly1rgk.jpg7 Then remove the panel like so below fitting is reverse fig 8 http://i55.tinypic.com/k1tpu8.jpg8 Job done i think these could be rubbed down and sprayed if not to bad may try it one day soon and post the out come cheers Arctic.;) |
All times are GMT. The time now is 21:07. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd