Rust proofing
I've got to treat some corrosion on the R25 this summer. I was going to use some Bilthamber wax and paint on the underside: dynax S50 & UB (brushed on, unless advised otherwise - I don't have spray kit). How must would I need for a small hatch of each product?
|
Dynax S50 comes in spray cans with an option for a 360 degree spray lance for inner sections (access via drainhole). One can treated both my sills and a coat on the rear suspension too.;)
https://i.imgur.com/GH4ni5J.jpg?1 https://i.imgur.com/KoeqnRC.jpg |
Thanks, one can of S50 then. Anyone know how much UB for the external surfaces? Thanks
|
Thanks, one can of S50 then. Anyone know how much UB for the external surfaces? Thanks
|
Quote:
You don't need to plaster it on for it work. |
Quote:
|
Bilt Hamber sell kits here - https://www.bilthamber.com/detailing..._store=default - slightly cheaper than buying the same products separately.
2 x dynax-s50 750ml 1 x dynax-UB 750ml 1 x dynax-UC 750ml 1 x surfex HD 1L £59.95 instead of £70.00 Which one to use where - https://www.bilthamber.com/which-cavity-wax |
Spray cans are a much better bet than paint on.
The liquid will get into places that you can't see and could possibly miss.---:D |
I will add my thoughts.
I stripped down my entire rear end, new everything apart from subframe, but all the parts I sent off for blasting, zinc priming, then finished in off-shore grade black 2pack paint. (even the new bits as the standard finish is garbage) I then used 3M white cavity wax inside the subframe and upper arms, which worked wonderfully, and also then used Dynax-UB to coat all the steel brake lines and fittings and bolt heads under the car to prevent anything corroding. I cannot recommend the dynax UB enough, it is great stuff. A huge can, and if you multi layer it, even if thick it dries quite clear over time so it does not really affect the look of the car. |
Thanks for the advice :D
|
All times are GMT. The time now is 14:10. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd