The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Members Own Spares For Sale (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=70)
-   -   Crofts door finishers (https://www.the75andztclub.co.uk/forum/showthread.php?t=55183)

Rover418275 27th February 2010 08:21

Crofts Door Finishers - List Closed.
 
Following on from the interest show in these I sent a PM to Croft (Dave) as set out below, together with his reply:

Quote:
Originally Posted by Rover418275
Hi David,

I understand that you have in the past produced door finishers for the 75s.
..... advise me if you would be interested in producing a new batch? If so, how many would be required for a minimum order and roughly how much would they be?
Thank you

Hello Mike
The factory have always insisted on 50 sets as a minimum. He said he would maintain the old price last time for 50 sets but advised brass plate had increased etc. so there may be an increase even for 50 sets.
If someone would like to get about 37 names together I would contact the factory again.
I say 37 as the Australian club advised me in Dec 09 that they would like this quantity.
With this commitment from members payment can be made to me by Paypal (only) and I could pack and despatch.
Over to you !
Regards
Dave

If you are interested in buying a set please add your name below together with the quantity you require:

This post is to gauge the interest from members in getting another batch of Crofts door finishers produced.

No set price have been agreed as yet to the increase in material costs in the last year, but as a guide cost lets say £50

Rover418275 * 2 Sets Required
X10Rich * 1 Set Required
Parker * 1 set
Kandyman 1 Set ( to help )
lowedb 1 set
beejay 1 set
JohnDotCom 1 set (if required for Numbers)
Roverowner 2 sets (just to get the ball rolling - one set for the raffle at the next Scandinavian Meet)
bobbin 1 set
pab 1 set
jmart 1 set
EnEnGee 2 Sets
Pedro 1 set
Ajd1 1 set
James.uk 1 Sets
M11GKV 1 Set
suzublu 1 Set
PEJO 1 Set
AlexLindop 1 set
ROD1: 2 Sets required
Hans.schapper 1 set
GRAHAM1961 2 Sets
Mimbo 3 set
Roverjoe 1 set.
teamninja 2 sets
Wolves 75 1 set
Yellow Peril 1 set
tammyboy 1 set
Generalkelly 1 set
Becs512 1 Set
justmicky 1 set?
Rammie 1 set
Marc.t1 1 set
mh007 1 set
Jokelan100 1 set
Johnvill73 1 set
martin75 1 set
neilll 1 set
Kai Herb 1 set
Rob Bell 1 set
tenerifemike 1 set
BigJohn 2 sets
marley 1 Set
J1MBO 1 set
Stubs 1 Set
Jamesgreen 2 sets
petertyrus 1 set please

Total 57 sets for club members

egremont - 13 on behalf of Australian owners club.

Running total: 70

Departed 32016 27th February 2010 08:46

how much and do you have a pic?

JohnDotCom 27th February 2010 08:55

As said above,
He doesn't have a price yet due to the increase in brass Plate.
He will enquire once a firm commitment of 37.
Hopefully near to the old price but Postage has also gone up since then.
Guide price say of £50 hopefully will cover it.

http://i144.photobucket.com/albums/r...lefinisher.jpg

http://i144.photobucket.com/albums/r...rFinishers.jpg

pab 27th February 2010 09:01

Quote:

Originally Posted by kieranswood (Post 475308)
how much and do you have a pic?

this picture will give you an idea..


http://i630.photobucket.com/albums/u...ver75088-1.jpg

X10Rich 27th February 2010 09:01

Rover418275 * 2 Sets Required
X10Rich * 1 Set Required

derekosb 27th February 2010 09:02

Quote:

Originally Posted by kieranswood (Post 475308)
how much and do you have a pic?

You'll see a few sets in the flesh next Saturday Kieran

http://www.the75andztclub.co.uk/foru...5&d=1224170559

Derek

egremont 27th February 2010 11:08

Rover 75 / MG ZT Door Handle Finisher Kits
 
Hi Rover 418275,

We Aussies are looking for 13.

Please refer to my post under the Becs512 thread - in which I have acknowledged 13 for the Oz owners.

Some 3,000 members have joined the club since the last production run - so surely, we can meet the minimum numbers for a production run.
It only needs a 1:81 ratio of takers (newbies since the last production) for this to succeed.

Don't let this opportunity pass you by:
This may well be our last opportunity to acquire this accessory; that not only protects against those nasty scratches, but also compliments your car's fine aesthetics - after all it did win the 1999 Italian award - "The World's Most Beautiful High Class Saloon"
Bruce.

Parker 27th February 2010 11:37

Well done on trying to get this organised for members. Count me in.

Rover418275 * 2 Sets Required
X10Rich * 1 Set Required
Parker * 1 set

Kandyman 27th February 2010 11:41

This post is to gauge the interest from members in getting another batch of Crofts door finishers produced.

No set price have been agreed as yet to the increase in material costs in the last year, but as a guide cost lets say £50

Rover418275 * 2 Sets Required
X10Rich * 1 Set Required
Parker * 1 set
Kandyman 1 Set ( to help )

Total 5

Departed 27th February 2010 11:42

Count me in as I like them and want a set for my other car:

Rover418275 * 2 Sets Required
X10Rich * 1 Set Required
Parker * 1 set
Kandyman 1 Set ( to help )
lowedb 1 set.


All times are GMT. The time now is 10:01.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd