Sill trim retaining clips DDQ100460
 

I need some DDQ100460 clips if anyone has some for sale.

https://rover.ebay.com/rover/0/0/0?m...2F391363978790


Sent from my SM-G975F using Tapatalk

https://rover.ebay.com/rover/0/0/0?m...2F171241889546

Sent from my SM-G975F using Tapatalk

Both of those should work. I bought the yellow ones but the white BMW ones might be better

Sent from my SM-G975F using Tapatalk

Those aren't the right shape. The yellow one will probably work for door cards and the carpet trims. The white one won't fit a 75/ZT kickplate.

DDQ100460 is a different beast altogether. It has two prongs and is about 30mm tall. This is it as seen from both sides (minus a prong in the one on the left!)

https://www.the75andztclub.co.uk/for...cfb083b2d3.jpg

https://www.ebay.co.uk/p/Rover-75-MG...460/1133954893

a tiny bit cheaper than Reamers ..oops Rimmers :o or B&G

or tazo if they are still going?

https://tazoparts.co.uk/products/mg-...-x-12-full-set

or China

https://mgrover.en.alibaba.com/produ...DDQ100460.html



or !!



We broke a few on a sunday a long while ago, and found that we could still clip the 2 bits in the trim. obviously not very good at hold the trim on though.

So being a sunday, and having cleaned off all the paint for a shiney trim look, and having pupmed the sills full of anti rust waxeys , we found with the holes being slotted there was room for a bit of error.

So we marked the positions of the broken clips in relation to the slots and clipping in the broken clips we also used a bit of gorilla glue on the busted clips making sure they were in line, popped on the trim.

Never going to remove these again in our lifetime ;). if they do then we get err,just busted clips again ?

Been on for 4 years now with no problems..

:getmecoat:
C.

BoB works out at £2.40 each inc postage (£59.95 for 25), Rimmers is £2.10 plus postage (£50.40 for 24 plus postage). Rimmers would be cheaper if they're shipped with an order for larger parts, otherwise BoB is probably a gnat's cheaper.

Tazo - I asked and he/they said "we are no longer trading". Which begs the question, why keep advertising. :duh:

China - I asked and Leo says they sent them all to XPart (and they're no longer manufactured).

My clips are all so badly broken I don't think the gorilla glue method will work. At best I might be able to cobble together 4 or 5 that might line up properly. That's not enough to hold these things on without them rattling about all over the place.

By reading the posts you need all 25 ? i might be able to help just bare with me for a couple of days see how many i have here cheers matt

Hi Matthew
Did you break up the platinum gold 05 saloon cdti CX05XKM for spares in the end? if so out of curiosity being a 2005 did it have the under bonnet pump, I know I have seen some 55/06 plates with them, I presume it is a contemporary with the leather seats, black oak dash, etc:shrug:

Hi steve no under bonnet pump and yes leather but dark blue with light oak dash and fork alloys cheers matt