PPD D-post trims - Rover badge type
Hello all
I am looking for a pair of LH & RH pre-Project Drive D-post trims that have the recess for the Rover longship badge. Both trims must be immaculate except for the badge itself - which can be faded or even missing. I.E. no scratches on the polished stainless steel, no bent metal ends, no scratches or damage to the plastic, no broken clips, rubber not perished/torn (I don't mind if rubber has come away from the plastic, they all do that eventually). If you can help, then please reply here or PM me. Thanks, Bolin |
I have a set. Pm me your email and I’ll send some photos.
Quote:
|
Hello Josh, thank you for your reply but if these are the ones that you are selling on eBay I will give them a miss as they appear to have bent metal ends and are covered in some white stuff anyway.
|
The white stuff is masking tape. It’s from idling the screws to it so they didn’t go missing.
Josh. |
Hi Colin.
I presume you have seen these below ? https://www.ebay.co.uk/itm/124692964...cAAOSwKBBggZjv |
Hi Steve, thanks for the reply, yes I have seen those, they are the later type with badges stuck on, I would like the early type with the recess for the badge as they do sit a bit more nicely with the proper recess.
|
Bump - still looking for these:)
|
I am still looking for a set of these trims, in perfect condition bar the badges.
Please let me know if you can help :) |
All times are GMT. The time now is 03:24. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd