Wanted - MDF Speaker Rings
 

Don't really have the skill / patience / tools to make a set up for myself.

Ideally looking for all 4, but the front 2 will do for now.

Can swap for the OEM ones if you'd like, or just pay outright.

Let me know what you have!

Hi Jack,

I have 4 left over from when I changed the speakers in my car, didn't fit the rings in the rear, they are only 18mm thick so you have to double up,
175mm O/D x 145 I/D, OK for 6 1/2" speakers.

Yours for postage, PM your address if interested.

If you need more or a different size I got these off e-bay.



http://www.the75andztclub.co.uk/foru...9c496e8a85.jpg

Can you post where you got them from on eBay, as I wouldn't mind some of these for my ZT.

Actually i've just been doing some more research - the reason why I wanted someone to make them for me was because they look quite annoying to make for the fronts due to needing to be curved etc:

http://farm5.static.flickr.com/4030/...88e7eab606.jpg

The rears are much flatter which is what I think you have.

Lots of different ones here here

HTH

Yep they were a bit of a pain had to hack them quite a bit, which is why you have to use two stuck together, also why I never done the rears,

No one sits in the back anyway :D

Well thanks to radi8or I now have 4 rings which can do a pair of doors - still need to do the fronts though, so if anyone has the fronts already shaped that would help massively.

Amazing - I'd never even considered looking on fleabay for these

Now there's an opprtunity for someone with woodworking skills making complete sets of these (rules me out though!)

I'll have a look at making some of these...wouldn't use mdf though...:)

What would you use then Carl?