Go Back   The 75 and ZT Owners Club Forums > Search Forums
Register FAQ Image Gallery Members List Calendar Search Today's Posts Mark Forums Read
Notices

Showing results 1 to 150 of 164
Search took 0.03 seconds.
Search: Posts Made By: JohnnyBG
Forum: Social Forum 24th December 2021, 15:49
Replies: 582
Views: 71,371
Posted By JohnnyBG
Thanks, good to know you're not the only one, so:...

Thanks, good to know you're not the only one, so: Dad Died Christmas Day 15 odd years ago. Hell of a drive from North Yorks to Selsey. Mum into St Richards at Chi. Died 21 February following...
Forum: The 75 and ZT Owners Club General Forum 17th December 2021, 17:23
Replies: 15
Views: 1,192
Posted By JohnnyBG
A few years ago the FOS spring on the 75 Tourer...

A few years ago the FOS spring on the 75 Tourer Connie CDTi broke just as I set off to return home from the Moselle Valley in Germany; day after a cold snap. Got it fixed there and stayed on holiday...
Forum: Technical Help Forum 8th December 2021, 14:50
Replies: 30
Views: 1,938
Posted By JohnnyBG
Steve (Arctic) your posts have been such a help. ...

Steve (Arctic) your posts have been such a help. I think without the help from this forum I doubt I'd have kept the Rover Connie CDTI Tourer or bought the ZT-T Tourer.

Keep going!

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 3rd December 2021, 20:14
Replies: 13,270
Views: 1,356,560
Posted By JohnnyBG
After the storms, rain and snow the ZT-T was...

After the storms, rain and snow the ZT-T was covered in pine needles.

Checked the plenum drains and all good but gave a rod through anyway. While doing it discovered a couple of extra jobs. One...
Forum: Regional Events Forum: Yorkshire & North Lincolnshire 30th November 2021, 16:53
Replies: 13
Views: 1,116
Posted By JohnnyBG
IKBA - where is the Waterwheel? I know Thornton...

IKBA - where is the Waterwheel? I know Thornton le Dale, it's only about 35 miles or less for me.

It is the day after my eldest's birthday and I have it in mind we may be going to York that...
Forum: Technical Help Forum 21st November 2021, 16:22
Replies: 13
Views: 951
Posted By JohnnyBG
Thanks for this. All the jacking pads for the...

Thanks for this. All the jacking pads for the ZT-T are in the spare wheel at the present and I'm planning to refit.

I will try my best to clean out first and will spray some "stuff" inside (can't...
Forum: Technical Help Forum 3rd November 2021, 15:15
Replies: 6
Views: 765
Posted By JohnnyBG
Well done sticking to your guns on the brightness...

Well done sticking to your guns on the brightness issue.

I'll just have to get the best longevity standard tail light bulbs I can find when I fit your set of LEDs.

I'll be away from this...
Forum: Technical Help Forum 3rd November 2021, 15:05
Replies: 5
Views: 612
Posted By JohnnyBG
In case anyone else reads this, the master and...

In case anyone else reads this, the master and slave were OK but took advice from this forum and replaced both. New master from DMGRS which required re-using the existing pipework but saved £200...
Forum: Technical Help Forum 3rd November 2021, 10:46
Replies: 5
Views: 612
Posted By JohnnyBG
Closing this off, the clutch was cream crackered...

Closing this off, the clutch was cream crackered and now the new one is in (with new master and slave) all good.

JohnnyBG
Forum: Technical Help Forum 1st November 2021, 20:49
Replies: 6
Views: 765
Posted By JohnnyBG
Hi Rick, first of all, the headlights you sent me...

Hi Rick, first of all, the headlights you sent me many months ago are to be fitted to the 75 Connie Tourer this week!

Focus at the moment is the ZTT Tourer I now have as well. Following...
Forum: Technical Help Forum 26th October 2021, 19:22
Replies: 11
Views: 840
Posted By JohnnyBG
Scott was great. Your service always good. ...

Scott was great. Your service always good.

Already about 500 miles on from getting the ZTT back. Clutch all good. Lots of small things to sort out (I'll be replacing the long brake pipes before...
Forum: Technical Help Forum 22nd October 2021, 15:37
Replies: 11
Views: 840
Posted By JohnnyBG
Macafee2 - thanks for the advice. The FBH was...

Macafee2 - thanks for the advice. The FBH was fitted on purchase and said to be working. There's a small unit in the cubby between the front seats. This has some figures flashing on it - I'll have...
Forum: Technical Help Forum 21st October 2021, 15:49
Replies: 11
Views: 840
Posted By JohnnyBG
Hi All, Firstly, thanks for the helpful...

Hi All,

Firstly, thanks for the helpful responses. I had ordered a nice new non-return valve bleeding kit (would still have it in the jam jar with hydraulic fluid) and some 50ml syringes.

Then...
Forum: Technical Help Forum 16th October 2021, 16:17
Replies: 11
Views: 840
Posted By JohnnyBG
Thanks for the replies and I'll take notice. The...

Thanks for the replies and I'll take notice. The only thing I planned to do before trying to bleed the system was to put the new master cylinder back in. The garage had refitted the old master...
Forum: Technical Help Forum 15th October 2021, 18:37
Replies: 11
Views: 840
Posted By JohnnyBG
Thanks a lot for the response. Taking each point...

Thanks a lot for the response. Taking each point in turn:

There's been no loss of fluid (except minor spillage);

I'm assured that the new and old master cylinders had fluid in - they were not...
Forum: Technical Help Forum 15th October 2021, 13:24
Replies: 11
Views: 840
Posted By JohnnyBG
URGENT MG ZTt Clutch bleeding

My garage has replaced clutch and slave with parts from Rimmer's, master cylinder with DMGRS left hand master.

They grumbled about swapping pipes for master but all good on that and they say they...
Forum: Technical Help Forum 4th September 2021, 15:47
Replies: 5
Views: 612
Posted By JohnnyBG
We'll, no takers on this so decided to not use...

We'll, no takers on this so decided to not use the car unnecessarily, pack up Sunday evening and leave early Monday, say 03:00 and get a straight run through to Teesside.

JohnnyBG
Forum: Technical Help Forum 3rd September 2021, 09:19
Replies: 5
Views: 612
Posted By JohnnyBG
ZT-T diesel stiff gearchange

Hi all, I'm over in Newton Stewart, Dumfries & Galloway and have the above problem. I've sent the message, below, to mininuts as he's relatively near me but wondered if anyone else had a suggestion...
Forum: The 75 and ZT Owners Club General Forum 8th August 2021, 17:01
Replies: 85
Views: 10,230
Posted By JohnnyBG
Had this with a motorcycle. The Bridgestones...

Had this with a motorcycle. The Bridgestones had stacks of tread when I bought it and had recently passed MoT. I din't feel confident with them but put it down to a new machine and just needed to...
Forum: The 75 and ZT Owners Club General Forum 28th July 2021, 13:33
Replies: 341
Views: 72,951
Posted By JohnnyBG
Made a great difference to my 75 CDTi Tourer...

Made a great difference to my 75 CDTi Tourer Connie, may need one for the ZT-T CDTi Tourer - are these really the last?

Johnny B
Forum: Regional Events Forum: The North East 13th July 2021, 18:53
Replies: 4
Views: 1,347
Posted By JohnnyBG
I'll be in Scotland. Ormesby Hall a great venue....

I'll be in Scotland. Ormesby Hall a great venue. I recall attending sprint events there at one time.

Maybe one day I'll meet others who are on my doorstep.

Johnny BG
Forum: Regional Events Forum: Yorkshire & North Lincolnshire 13th July 2021, 18:50
Replies: 59
Views: 4,981
Posted By JohnnyBG
Not been to a meet at all yet and unfortunately...

Not been to a meet at all yet and unfortunately not this one as have to drop of and pick up two youngest at Mount Grace Priory either side of midday on 18 July.

Weather looks great for you all. ...
Forum: Regional Events Forum: Scotland 13th July 2021, 18:41
Replies: 35
Views: 5,589
Posted By JohnnyBG
When will this be? Johnny BG

When will this be?

Johnny BG
Forum: I.C.E. Forum 23rd June 2021, 19:57
Replies: 1
Views: 1,911
Posted By JohnnyBG
Alpine CDE-185BT steering wheel control kit

Hi All

My newly acquired ZT-T CDTi has one of the above fitted but apparently no connection to the steering wheel controls.

Can anyone point me in a direction? (other than ripping it out, there...
Forum: Technical Help Forum 23rd June 2021, 18:45
Replies: 6
Views: 478
Posted By JohnnyBG
The set up on my 75 has been faultless for the...

The set up on my 75 has been faultless for the 100k+ I've covered in it. It was this that made me think I'd try for a secondhand setup for the ZT-T or get the Valeo kit.

The Cisbo is a lot...
Forum: Technical Help Forum 23rd June 2021, 09:19
Replies: 6
Views: 478
Posted By JohnnyBG
Thanks, that's a help. There's a Kenwood unit in...

Thanks, that's a help. There's a Kenwood unit in that RT rear space. I don't know if it works as there's an aftermarket head unit in place. The steering wheel controls don't work with that and I'll...
Forum: Technical Help Forum 22nd June 2021, 18:32
Replies: 6
Views: 478
Posted By JohnnyBG
MG ZT-T 2004 cdti parking aid sensor retrofit

Hi All

I've done a few searches but can't find exactly the help I was looking for.

There's no parking aid on the car.

Is it simply a case of buying a secondhand kit off Ebay (or better still...
Forum: The 75 and ZT Owners Club General Forum 20th June 2021, 19:51
Replies: 48
Views: 4,716
Posted By JohnnyBG
Quote: Originally Posted by KWIL View Post ...

Quote:
Originally Posted by KWIL View Post
Quote fron 4 years old doc issued by Environmental Agency

"If a business or individual wants to receive waste vehicles for recycling or for dismantling...
Forum: Was it you? 11th May 2021, 19:25
Replies: 4
Views: 605
Posted By JohnnyBG
Where are you in the Boro, I can drive up and...

Where are you in the Boro, I can drive up and down a few times for you! I'll be popping to Coulby Newham Shopping Centre for a car wash pretty soon.

JohnnyBG
Forum: Technical Help Forum 7th May 2021, 14:30
Replies: 14
Views: 1,491
Posted By JohnnyBG
Update, although there's not much interest. ...

Update, although there's not much interest. Artic's guidance a big help. New pump in, blew through the pipes after disconnecting from the diaphragm holder three-way connector. Reconnected the...
Forum: Social Forum 2nd May 2021, 15:29
Replies: 23
Views: 1,409
Posted By JohnnyBG
Great comments, I also live in a village and know...

Great comments, I also live in a village and know professionals who really know what they are doing. I also resent paying people to do what I can, and generally don't. There are occasions when time...
Forum: Technical Help Forum 1st May 2021, 08:57
Replies: 14
Views: 1,491
Posted By JohnnyBG
Thanks to Arctic for the photos, great. ...

Thanks to Arctic for the photos, great.

Revived this post in order not to have loads of posts on same topic.

I've removed the pump, it doesn't work when connect directly to a 12v battery, tried...
Forum: I.C.E. Forum 21st April 2021, 19:17
Replies: 2
Views: 2,408
Posted By JohnnyBG
I drop the front, like to put in a CD, and...

I drop the front, like to put in a CD, and fiddles with the ribbon connector under the spring loaded flap. I intermittently got the fourth button to work so have radio now.

Just need to remove the...
Forum: I.C.E. Forum 19th April 2021, 19:29
Replies: 2
Views: 2,408
Posted By JohnnyBG
Giving this a bump as I would really be grateful...

Giving this a bump as I would really be grateful for any help or do I just need to scrap it?

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 13th April 2021, 19:55
Replies: 31
Views: 4,125
Posted By JohnnyBG
"(Except in Devon, Cornwall, North Wales, North...

"(Except in Devon, Cornwall, North Wales, North England and Scotland)"

Why? Surely there should be some explanation.

JohnnyBG
Forum: I.C.E. Forum 7th April 2021, 18:26
Replies: 2
Views: 2,408
Posted By JohnnyBG
Iovox CD 80 button 4 failed so can't complete code

Hi'

It's in the title really.

Just this morning when I started up the radio asked for code, no problem, I have it! I remember it as well as having it written down as every time I play a CD...
Forum: Technical Help Forum 6th April 2021, 13:19
Replies: 2
Views: 461
Posted By JohnnyBG
Hi It's the second photo, so I need some...

Hi

It's the second photo, so I need some scrivet type fixings, not to mention the screws. What's the right Part No?

I also have an old motorcycle and find ordering by part no. tends to be the...
Forum: Technical Help Forum 5th April 2021, 18:44
Replies: 2
Views: 461
Posted By JohnnyBG
&% Conn Tourer Mk2 panel above the pedals

Hi All

I took this off to look at the switch for the cruise control ages ago. Was distracted by other more important things (HPFP, hydromount, rear wheel bearing, emptying plenum, etc.).

I...
Forum: Technical Help Forum 31st March 2021, 18:41
Replies: 10
Views: 998
Posted By JohnnyBG
Thanks for the comments. I just need to get...

Thanks for the comments.

I just need to get four standard wheel bolts so I can replace all the bolts them all once this one is out. The one the workshop lads put in doesn't match the other...
Forum: Social Forum 31st March 2021, 18:36
Replies: 407
Views: 35,106
Posted By JohnnyBG
The diary thing isn't unusual. My Dad was asked...

The diary thing isn't unusual. My Dad was asked to do the same thing for a stomach problem.

Turned out it was colitis but the diary helped them with diagnosis.

JohnnyBG
Forum: Technical Help Forum 30th March 2021, 19:46
Replies: 10
Views: 998
Posted By JohnnyBG
"I have a spare number 12 key you can have if you...

"I have a spare number 12 key you can have if you want, just pm me your address and I will pop it in the post for you."

Unfortunately I'd already order the replacement. It arrived today, very...
Forum: The 75 and ZT Owners Club General Forum 30th March 2021, 19:32
Replies: 27
Views: 2,963
Posted By JohnnyBG
Does he realise that there is an option for...

Does he realise that there is an option for assistance? As per previous post, D&G covers a large area. Sanquhar a relatively short hop compared with Portpatrick! COVID aside, I am usually a...
Forum: Technical Help Forum 27th March 2021, 18:43
Replies: 10
Views: 998
Posted By JohnnyBG
Thanks, I did see a number 12 0n the back of it...

Thanks, I did see a number 12 0n the back of it but didn't comprehend. I'd been out in the cold for too long by then.

Handbrake is now working although not top notch and adjusted incorrectly by...
Forum: Technical Help Forum 27th March 2021, 15:46
Replies: 10
Views: 998
Posted By JohnnyBG
Locking wheel nut

My "locking" wheel nuts are like ordinary ones but with a hollow, splined, recess. There's a bolt, hex at on end and externally splined on the other. Slot it in and use your wheel brace/ torque...
Forum: The 75 and ZT Owners Club General Forum 16th March 2021, 20:44
Replies: 18
Views: 1,092
Posted By JohnnyBG
My axle stands are fixed to a sheet of thick...

My axle stands are fixed to a sheet of thick marine ply, even if the legs are inclined to spread, they won't. Placed under the the subframe roughly as Azur suggests.

They took the weight of my...
Forum: The 75 and ZT Owners Club General Forum 16th March 2021, 20:18
Replies: 30
Views: 2,957
Posted By JohnnyBG
As said above, helped me locate a part on offer...

As said above, helped me locate a part on offer from someone else with no benefit to himself.

I was hoping to get to see him once pandemic ended.

JohnnyBG
Forum: Social Forum 12th March 2021, 21:05
Replies: 407
Views: 35,106
Posted By JohnnyBG
Good luck with it all. Similar area but not...

Good luck with it all.

Similar area but not the same as no pain at all. About 7 years ago my brother had several stents fitted, triggered by very overlarge Iliac artery. Consulant sadi tell your...
Forum: Technical Help Forum 12th March 2021, 20:42
Replies: 2
Views: 332
Posted By JohnnyBG
Drivers window switches - 75 Facelift Tourer

Somehow the part that you push / pull has popped off. I know this sounds daft but it doesn't seem to just pop back on. Is there some trick to it?

I searched the "How to's" but couldn't see any...
Forum: The 75 and ZT Owners Club General Forum 10th March 2021, 20:59
Replies: 37
Views: 1,974
Posted By JohnnyBG
+1 for the disgusting roads and I think it will...

+1 for the disgusting roads and I think it will be a while before I ride either motorcycle in the dark.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 10th March 2021, 20:54
Replies: 2
Views: 346
Posted By JohnnyBG
Thanks to MickyBoy for waist level door trims

They look good out of the substantial packing. Genuine people on the forum.

Will get the trims fitted and the doorcard re-fitted when weather is better.

JohnnyBG
Forum: Technical Help Forum 9th March 2021, 13:56
Replies: 22
Views: 2,082
Posted By JohnnyBG
HI I'll try and do that but not anytime...

HI

I'll try and do that but not anytime soon, sorry. I have to give priority to keeping the the Yamaha fit (supposed to give it a 16K service but so far only changed the oil!) and getting the...
Forum: Technical Help Forum 6th March 2021, 14:42
Replies: 22
Views: 2,082
Posted By JohnnyBG
Cheers, Stocktake. And a big thank you to...

Cheers, Stocktake.

And a big thank you to Artic and others who pointed me n the right direction. I fitted a working s/hand unit this morning as it wasn't raining. I squirted some silicon in...
Forum: The 75 and ZT Owners Club General Forum 1st March 2021, 21:03
Replies: 36
Views: 1,591
Posted By JohnnyBG
And another welcome from the northern edge of...

And another welcome from the northern edge of North Yorks, Great Ayton.

JohnnyBG
Forum: Technical Help Forum 1st March 2021, 20:43
Replies: 22
Views: 2,082
Posted By JohnnyBG
Great post and it's the kind of thing I usually...

Great post and it's the kind of thing I usually succeed with as opposed to paint and trim!

The link he posted is to...
Forum: Technical Help Forum 28th February 2021, 20:46
Replies: 22
Views: 2,082
Posted By JohnnyBG
Re-booting tis thread in the hope that someone...

Re-booting tis thread in the hope that someone has an answer to the actuator motors.

I'd like to fix the nearside rear so that it opens as well as locks before I put the doorcard back (need to get...
Forum: The 75 and ZT Owners Club General Forum 28th February 2021, 20:01
Replies: 20
Views: 1,575
Posted By JohnnyBG
Thanks such a lot. I thought that the grey ones...

Thanks such a lot. I thought that the grey ones and the fir tree were "rogue" but it looks like it was all original! That's soooo helpful.

I have all the clips, none lost or broken apart that...
Forum: The 75 and ZT Owners Club General Forum 28th February 2021, 17:38
Replies: 20
Views: 1,575
Posted By JohnnyBG
Hi Maybe I could've saved myself the trouble...

Hi

Maybe I could've saved myself the trouble if I'd searched first. I took the doorcard off expecting all I needed to do was order the trim! Found what appears to be an electrolytic type...
Forum: Technical Help Forum 24th February 2021, 20:50
Replies: 4
Views: 531
Posted By JohnnyBG
Will you post how it goes, I fancy changing but...

Will you post how it goes, I fancy changing but have other things on at the moment.

Johnny BG
Forum: The 75 and ZT Owners Club General Forum 23rd February 2021, 20:46
Replies: 31
Views: 2,394
Posted By JohnnyBG
"all of whom swan about in chauffeured limos...

"all of whom swan about in chauffeured limos think that they are?"

No party political points being made, which is great as there's not much to chose. Too many (most?) of our politicians have...
Forum: The 75 and ZT Owners Club General Forum 11th February 2021, 19:15
Replies: 6
Views: 583
Posted By JohnnyBG
I bought one a while ago, goes on the keyring. ...

I bought one a while ago, goes on the keyring.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 5th February 2021, 20:46
Replies: 104
Views: 8,235
Posted By JohnnyBG
75 cdti Connie Tourer 2004 - 176,00 so far 100k mine

Hope this has worked.

Soooo many lovely cars. I'm sulking.I've started cruising round Ebay and wondering if I just buy another. I won't. I know the HPFP is new, the clutch and cylinders have...
Forum: The 75 and ZT Owners Club General Forum 5th February 2021, 20:25
Replies: 13,270
Views: 1,356,560
Posted By JohnnyBG
" goodbye mucky yellow!" I like that. I...

" goodbye mucky yellow!"

I like that. I like the way lights fade off when switched off rather than a sharp change.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 5th February 2021, 20:14
Replies: 15
Views: 1,076
Posted By JohnnyBG
I thought that was what smileys were! But...

I thought that was what smileys were! But thought it best to ask.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 4th February 2021, 19:41
Replies: 15
Views: 1,076
Posted By JohnnyBG
What's smiley plates? JohnnyBG

What's smiley plates?

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 28th January 2021, 12:55
Replies: 13
Views: 1,169
Posted By JohnnyBG
Good luck with getting it sorted, however you...

Good luck with getting it sorted, however you manage to do it.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 27th January 2021, 16:58
Replies: 8
Views: 827
Posted By JohnnyBG
I keep a roll of Ever Build Silweld in the car,...

I keep a roll of Ever Build Silweld in the car, https://www.everbuild.co.uk/product/silweld/

I've used it on sanitary ware and it's worked well. Not cheap but if it gets you out of trouble....
...
Forum: The 75 and ZT Owners Club General Forum 18th January 2021, 16:00
Replies: 16
Views: 1,785
Posted By JohnnyBG
"mainly from over 50s who no doubt thinking they...

"mainly from over 50s who no doubt thinking they are safe after the vaccine."

I wasn't aware that over 50's were being vaccinated (other than possibly vulnerable groups). Only today it was...
Forum: The 75 and ZT Owners Club General Forum 8th January 2021, 20:35
Replies: 65
Views: 6,028
Posted By JohnnyBG
Confess that I had "lost" my pink licence when I...

Confess that I had "lost" my pink licence when I got the photocard.

I have a couple of years left on the photocard.

I'm always mislaying it and might not be able to find it when renewal time...
Forum: The 75 and ZT Owners Club General Forum 8th January 2021, 20:26
Replies: 4
Views: 613
Posted By JohnnyBG
Yep, Rick messaged me from holiday. Back on...

Yep, Rick messaged me from holiday.

Back on 18th.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 7th January 2021, 08:44
Replies: 4
Views: 613
Posted By JohnnyBG
BigJohn Thanks, I thought he was back...

BigJohn

Thanks, I thought he was back Monday.

I needed a couple of refurbished MkII halogen headlights from him, he'd PM'd me about them Monday but there was a problem with my PM reply.
...
Forum: The 75 and ZT Owners Club General Forum 6th January 2021, 19:39
Replies: 4
Views: 613
Posted By JohnnyBG
Rick-sta please call me

Hi Rick,

Maybe your inbox is full. Please would you PM me or if you empty out the inbox, you'll see a PM with my contact details.

Cheers

JohnnyBG
Forum: Social Forum 5th January 2021, 20:50
Replies: 15
Views: 769
Posted By JohnnyBG
Best thing I had in snow and ice was the...

Best thing I had in snow and ice was the Matchless motorcycle with a heavy black box sidecar (no seat just a lid in order to take luggage).

Got into work at ICI Wilton and upset some of the car...
Forum: The 75 and ZT Owners Club General Forum 3rd January 2021, 20:52
Replies: 18
Views: 1,537
Posted By JohnnyBG
Brilliant! We had a 110 when I was a lad; it...

Brilliant!

We had a 110 when I was a lad; it was lovely to ride in and could cruise beautifully, particularly when the overdrive was popped on.

The little reserve switch was handy as it only...
Forum: The 75 and ZT Owners Club General Forum 3rd January 2021, 20:44
Replies: 2
Views: 481
Posted By JohnnyBG
Facelift 75 Tourer wheels

Hi

I looked at the illustrations on the forum as I want to get a matching full size spare but not sure what my wheels are - 16" 7 spoke alloys? What's their name?

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 31st December 2020, 16:08
Replies: 21
Views: 1,558
Posted By JohnnyBG
"obligatory 10 year photo upgrade" Thanks, I...

"obligatory 10 year photo upgrade"

Thanks, I was unaware!

JohnnyBG
Forum: Technical Help Forum 31st December 2020, 15:44
Replies: 18
Views: 1,039
Posted By JohnnyBG
"French Gendarmes are a little bit anti-Brits" ...

"French Gendarmes are a little bit anti-Brits"

Not always. On the Matchless, on the way back from a rally in the pouring rain, they waved me round the toll booth for the peage. Good job as I was...
Forum: Technical Help Forum 31st December 2020, 15:25
Replies: 21
Views: 1,320
Posted By JohnnyBG
Ebay No 272238107403 I have a couple of...

Ebay No 272238107403

I have a couple of similar, one straight and one pistol grip.

And you can always snap the hacksaw blade short before starting. Requires patience in use and keeping the...
Forum: Technical Help Forum 30th December 2020, 19:39
Replies: 21
Views: 1,320
Posted By JohnnyBG
Maybe worth a bit of freezer spray onto the...

Maybe worth a bit of freezer spray onto the rusted end, then heat, maybe crack the rust off? The freezer spray usually has a length of small bore plastic pipe like WD40. Might be cheaper to get...
Forum: The 75 and ZT Owners Club General Forum 27th December 2020, 22:14
Replies: 13,270
Views: 1,356,560
Posted By JohnnyBG
Brian Cheers, don't think the garage is open...

Brian

Cheers, don't think the garage is open again until 04 January so I have some time. I took it straight to the garage on the day so there would be no delay in them taking a look when they...
Forum: The 75 and ZT Owners Club General Forum 27th December 2020, 22:01
Replies: 22
Views: 2,030
Posted By JohnnyBG
WWE is a wrestling thing that those younger than...

WWE is a wrestling thing that those younger than us are keen on:

https://www.wwe.com/

I think its NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- but there you are.

Johnny BG
Forum: The 75 and ZT Owners Club General Forum 26th December 2020, 20:45
Replies: 22
Views: 2,030
Posted By JohnnyBG
"God that's awful" For that first red one,...

"God that's awful"

For that first red one, check the number plate "WWE" is probably what people will look to buy.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 24th December 2020, 20:12
Replies: 13
Views: 691
Posted By JohnnyBG
I applaud the tyre fail on age. I bought a...

I applaud the tyre fail on age.

I bought a 1994 Yamaha, little one XJ600. I'm the second owner and it had a bit over 14K. The tyres were full of tread but old and despite advice from fellow...
Forum: The 75 and ZT Owners Club General Forum 24th December 2020, 20:04
Replies: 13
Views: 1,066
Posted By JohnnyBG
Brilliant, I'd love one for the facelift Tourer,...

Brilliant, I'd love one for the facelift Tourer, the badge that's on is very scruffy.

More to think about as need to get pair of replacement headlights and the front bumper re-sprayed after the...
Forum: The 75 and ZT Owners Club General Forum 24th December 2020, 16:50
Replies: 13,270
Views: 1,356,560
Posted By JohnnyBG
Took the Rover to the garage as it rolled into...

Took the Rover to the garage as it rolled into the back of a van when parked!

I always (ha ha) put cars in gear when parked but being hassled to get shopping to the house and unable to park in...
Forum: The 75 and ZT Owners Club General Forum 19th December 2020, 21:04
Replies: 20
Views: 1,561
Posted By JohnnyBG
Freezer spray, although never had to use it on...

Freezer spray, although never had to use it on wheel nuts.

JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 19th December 2020, 20:56
Replies: 48
Views: 4,439
Posted By JohnnyBG
Sorry, on topic, place in history Rover related...

Sorry, on topic, place in history Rover related was the drive to Liewen in the Moselle valley.

Rover 75 CDTI Connie Tourer, the same as I still have only now 100k more miles, 5 up, luggage and 4...
Forum: The 75 and ZT Owners Club General Forum 19th December 2020, 20:48
Replies: 48
Views: 4,439
Posted By JohnnyBG
Thanks, it's good to know you are not on your...

Thanks, it's good to know you are not on your own. Mum and Dad were great despite the grief I gave them in my mid to late teens they were always supportive and loving. Dad died on Christmas Day and...
Forum: The 75 and ZT Owners Club General Forum 31st May 2020, 15:53
Replies: 39
Views: 4,463
Posted By JohnnyBG
Hi, I hope I'm not hijacking this thread but my...

Hi, I hope I'm not hijacking this thread but my aircon is working despite my having left the Tourer in a compound for near 18 months. Cost more than I'd get for the car to put it back on the road...
Forum: The 75 and ZT Owners Club General Forum 31st May 2020, 15:34
Replies: 66
Views: 6,137
Posted By JohnnyBG
It all looks really smart, the original centres...

It all looks really smart, the original centres are the way to go.


JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 26th May 2020, 16:16
Replies: 5
Views: 903
Posted By JohnnyBG
Apologies for hijacking this, particularly as...

Apologies for hijacking this, particularly as I've not posted in months (I have valid reasons) but are those the clips for the plastic finishing type bars that are inside the car on the floor before...
Forum: The 75 and ZT Owners Club General Forum 23rd March 2020, 13:40
Replies: 3
Views: 960
Posted By JohnnyBG
Nearly 600 mls 75 CDTI Tourer round trip last Friday

From northern edge of N Yorks to Camberley in Surrey via West Wickham in Cambridgeshire. Collecting a motorcycle. Borrowed a trailer from a fellow motorcycle club member at West Wickham (the long...
Forum: The 75 and ZT Owners Club General Forum 28th February 2020, 16:07
Replies: 76
Views: 6,205
Posted By JohnnyBG
Got called away, auto logged out. Logged back in...

Got called away, auto logged out. Logged back in and refreshed the page, signed back in and Ctrl+V gave the result below. Just have to remember to do it!



Hope my luck holds on the clutch...
Forum: The 75 and ZT Owners Club General Forum 28th February 2020, 15:37
Replies: 76
Views: 6,205
Posted By JohnnyBG
Hope my luck holds on the clutch front (new LUK...

Hope my luck holds on the clutch front (new LUK clutch / DMF / master and slave about 15k ago).........BUT................


On losing the content of posts, when finished typing, press Ctrl+ A -...
Forum: The 75 and ZT Owners Club General Forum 18th February 2020, 23:02
Replies: 19
Views: 1,987
Posted By JohnnyBG
I am resisting this disease. Now at nearly 1k...

I am resisting this disease. Now at nearly 1k miles si CE I put the Conny 75 Tourer facelift back on the road after leaving it in the garage compound for about 18 months. What an idiot!
I too find...
Forum: Technical Help Forum 31st January 2020, 20:13
Replies: 23
Views: 4,365
Posted By JohnnyBG
Followed this post to the end hoping it would...

Followed this post to the end hoping it would provide some pictures but the attachments are invalid.


I'd like to get the servos working, only ones that do now are the tailgate and front...
Forum: Technical Help Forum 31st January 2020, 20:03
Replies: 5
Views: 814
Posted By JohnnyBG
Cheers, my window scratched quite a bit and read...

Cheers, my window scratched quite a bit and read about the problems with the velvet tape stuff but would like to (summer time) fit an unscratched window!


I like mechanics but always seem to...
Forum: The 75 and ZT Owners Club General Forum 31st January 2020, 19:55
Replies: 15
Views: 2,084
Posted By JohnnyBG
Didn't feel a thing at Great Ayton! ...

Didn't feel a thing at Great Ayton!


JohnnyBG
Forum: Technical Help Forum 25th January 2020, 20:15
Replies: 28
Views: 4,575
Posted By JohnnyBG
Found this interesting. I have the scratched...

Found this interesting. I have the scratched glass and screech. I had been looking at re-surfacing the glass BUT clearly a pointless exercise until the guides cleaned / refurbished with the 3M...
Forum: The 75 and ZT Owners Club General Forum 21st January 2020, 10:00
Replies: 8
Views: 951
Posted By JohnnyBG
Thanks a lot to everyone, i'll keep an eye on...

Thanks a lot to everyone, i'll keep an eye on Members spares for sale etc. I;ve got the 16" wheels so look like it's a go-er.


I've been caught out a couple of times with spacesavers and having...
Forum: The 75 and ZT Owners Club General Forum 19th January 2020, 20:28
Replies: 8
Views: 951
Posted By JohnnyBG
75 CDTi Tourer conn 2004 full size spare wheel?

Apologies for a really daft post but I am wondering if I can fit a full size wheel instead of the spacesaver? I only have the "polystrene" toolkit insert and wonder if that would still fit.


...
Forum: Technical Help Forum 19th January 2020, 15:19
Replies: 23
Views: 2,432
Posted By JohnnyBG
No dims in the broken cable photos but these are...

No dims in the broken cable photos but these are standard type brass barrels used in vintage / veteran and even postwar (like my) motorcycle. Particularly for gear change cables. I wouldn't use a...
Forum: Technical Help Forum 19th January 2020, 14:59
Replies: 18
Views: 1,828
Posted By JohnnyBG
I thought to replace the original chain drive on...

I thought to replace the original chain drive on my 1956 motorcycle magneto. The new one wouldn't fit as good as the old one. They run in grease and I'd personally covered over 70k on the bike. ...
Forum: Technical Help Forum 19th January 2020, 14:32
Replies: 25
Views: 2,774
Posted By JohnnyBG
Just to round off in case others have similar...

Just to round off in case others have similar experience, after fitting the new (140) expansion tank cap after 45 or so rapid miles no coolant lost at all.


Just the fan to fix now, but it'll...
Forum: The 75 and ZT Owners Club General Forum 17th January 2020, 20:55
Replies: 15
Views: 2,002
Posted By JohnnyBG
Had a similar thing with a Mondeo estate,...

Had a similar thing with a Mondeo estate, suggesting I had been using a scrapped car!


Turned out it was a simple keying error but it caused no end of 'phone calls and stress.


JohnnyBG
Forum: Technical Help Forum 17th January 2020, 20:40
Replies: 2
Views: 763
Posted By JohnnyBG
Fit drivers side cup holder to 75 cdti 2004 conn

Hi all


I was browsing parts on Ebay and thought, I don't have a cup holder and there was one (although from a Mk1).


Surely can't be hard to do?


Replacing the pollen filter tomorrw and...
Forum: Technical Help Forum 15th January 2020, 20:06
Replies: 19
Views: 2,097
Posted By JohnnyBG
Only yesterday I was berating myself for what I...

Only yesterday I was berating myself for what I did to the 75 Tourer cdti connie. I'd covered over 70k in it running it up to 160k. Serviced, parts replaced as need in a very long established local...
Forum: Technical Help Forum 15th January 2020, 19:32
Replies: 1
Views: 498
Posted By JohnnyBG
Effusive is the word. Great find. Wish I...

Effusive is the word. Great find.


Wish I could get a new one instead of chasing around for parts for the 75.


JohnnyBG
Forum: Technical Help Forum 15th January 2020, 19:23
Replies: 18
Views: 2,117
Posted By JohnnyBG
I have a problem with poison in that it is...

I have a problem with poison in that it is indiscriminate. If you inadvertently kill the predators (owls, hawks etc.) the position gets worse in the long run.


But I do live in a country area,...
Forum: Technical Help Forum 10th January 2020, 19:34
Replies: 9
Views: 1,060
Posted By JohnnyBG
Just to back up previous comment, I had an...

Just to back up previous comment, I had an airlock on my CDTi after water pump replacement and I experienced the cold heater.

Followed advice on this forum and all fine. I didn't empty and flush...
Forum: Items Wanted 10th January 2020, 15:23
Replies: 1
Views: 592
Posted By JohnnyBG
75 CDTI facelift undertray

Not a priority but I would like to fit one back on if I can get one considerably cheaper than the new OEM's from Rimmers.


Lost mine on the downside of a hump bgack bridge taken too fast. Just a...
Forum: Technical Help Forum 10th January 2020, 14:47
Replies: 25
Views: 2,774
Posted By JohnnyBG
Resurrecting this thread. After approx...

Resurrecting this thread.


After approx 600 miles over Christmas and on return next morning checked coolant. Needed to add maybe a quarter a litre to header tank. I certainly hadn't been light...
Forum: The 75 and ZT Owners Club General Forum 9th January 2020, 13:41
Replies: 7
Views: 907
Posted By JohnnyBG
"Stretch" 75 on Ebay

Over £4k.


https://www.ebay.co.uk/itm/ROVER-75-LWB-LIMO-2-0-CDTI-1-OWNER-77K-MILES-VGC/293373921897?hash=item444e72ca69:g:l2YAAOSwc2Zd81WY



JohnnyBG
Forum: Technical Help Forum 8th January 2020, 13:48
Replies: 10
Views: 1,492
Posted By JohnnyBG
This happened to me when I was setting off home...

This happened to me when I was setting off home in the 75 from holiday in Germany. May not be relevant but it had been warm and overnight there was a light frost; we only travelled a few metres.
...
Forum: The 75 and ZT Owners Club General Forum 25th December 2019, 17:49
Replies: 0
Views: 613
Posted By JohnnyBG
75 CDTi Tourer Connie 2004 front seat covers

I notice a ittle wear in the usual kind of place on drivers seat and thought a cover would save the original.


Obviously, the stuff currently on sale through Rimmer's is about stripping the...
Forum: Technical Help Forum 25th December 2019, 17:04
Replies: 25
Views: 2,774
Posted By JohnnyBG
All's good! Back to the Rover this morning...

All's good! Back to the Rover this morning (she'll kill me soon disappearing on Christmas morning) coolant down a tad but was overfilled anyway. I had been filling up to the top of the fins when...
Forum: Technical Help Forum 25th December 2019, 07:47
Replies: 25
Views: 2,774
Posted By JohnnyBG
Thanks both, unlikely to do this Christmas Day...

Thanks both, unlikely to do this Christmas Day but will do.


JohnnyBG
Forum: Technical Help Forum 24th December 2019, 16:19
Replies: 25
Views: 2,774
Posted By JohnnyBG
FINAL (hopefully) UPDATE - Needed to add about a ...

FINAL (hopefully) UPDATE - Needed to add about a litre to the expansion tank. ignition on, OBD on the trip meter and away. About 26 miles and at 60mph steady speed there was slight movement...
Forum: Technical Help Forum 24th December 2019, 09:42
Replies: 25
Views: 2,774
Posted By JohnnyBG
UPDATE - First of all thanks to T-Cut for his...

UPDATE - First of all thanks to T-Cut for his input and Jules for the fan threads.



Followed Haynes manual and bled system. No real change on run out. Actually looked at the dial gauge (not...
Forum: Technical Help Forum 21st December 2019, 17:09
Replies: 25
Views: 2,774
Posted By JohnnyBG
Doing this on the 'phone but thanks a lot for...

Doing this on the 'phone but thanks a lot for your comprehensive response. I took the Alhambra on the the trip (away now) and the flooding is substantial here. I'm not sure the lower ride 75 would...
Forum: Technical Help Forum 19th December 2019, 17:46
Replies: 25
Views: 2,774
Posted By JohnnyBG
I think my fan isn't working. I'll do the demist...

I think my fan isn't working. I'll do the demist test when I come back from Leominster (see end of post) and have read other threads on this topic.


Went for a run back end of afternoon and...
Forum: Technical Help Forum 19th December 2019, 10:05
Replies: 25
Views: 2,774
Posted By JohnnyBG
Driving to Leominster near Hereford tomorrow...

Driving to Leominster near Hereford tomorrow afternoon!


I've been looking at the antifreze threads and I see that my coolant is a rust colour! Does that mean it's pink OAT?


Help. I plan...
Forum: Technical Help Forum 16th December 2019, 20:47
Replies: 50
Views: 5,284
Posted By JohnnyBG
I've so far covered over 70k on my 2004 CDTi,...

I've so far covered over 70k on my 2004 CDTi, which I assume is standard and 131 bhp (?). I find it nippy enough, towed a caravan around the UK with five of us in the car. Without caravan went to...
Forum: The 75 and ZT Owners Club General Forum 15th December 2019, 20:35
Replies: 1
Views: 649
Posted By JohnnyBG
Slip on seat covers - 2004 75 cdti tourer connie

I'm sure I posted this before but was having a few connection troubles so.................


Any recommendations for cheap but decent fit slip on covers for the front seats? Or just drivers seat?...
Forum: Technical Help Forum 14th December 2019, 15:06
Replies: 25
Views: 2,774
Posted By JohnnyBG
Follow up, my garage will be looking at this on...

Follow up, my garage will be looking at this on Monday morning and I'll be off to work in the SEAT Alhambra with the dodgy clutch.

They seem to think that parts are not available to seal up the...
Forum: Technical Help Forum 11th December 2019, 20:54
Replies: 25
Views: 2,774
Posted By JohnnyBG
Yeah, I'm a convert to use of torque wrenches but...

Yeah, I'm a convert to use of torque wrenches but perhaps there was some old school approach.


JohnnyBG
Forum: Technical Help Forum 11th December 2019, 15:25
Replies: 25
Views: 2,774
Posted By JohnnyBG
Well, Artic, unfortunately not that housing. ...

Well, Artic, unfortunately not that housing.


It turns out it's the thermostat housing on the new water pump that I had fitted not more than 500 miles ago. There was a problem at the time as the...
Forum: Technical Help Forum 8th December 2019, 20:38
Replies: 25
Views: 2,774
Posted By JohnnyBG
Thanks a lot for those points. That top hose...

Thanks a lot for those points. That top hose could be a point, I had to jack the engine up a long way to do the other work and wonder if there might've been a bit of strain there.


The only...
Forum: The Freebies Bazaar 8th December 2019, 20:14
Replies: 2
Views: 1,697
Posted By JohnnyBG
MTF94 - available soon

Hi apparently I only need 1.6 litres and just bought 5 litres so even if I spill loads I should have enough left for a free oil change for someone ONCE I DO THE JOB. Not this minute but planned in...
Forum: Technical Help Forum 8th December 2019, 20:09
Replies: 16
Views: 1,937
Posted By JohnnyBG
What did you clean off with before re-bonding? ...

What did you clean off with before re-bonding?


JohnnyBG
Forum: Technical Help Forum 8th December 2019, 20:05
Replies: 3
Views: 570
Posted By JohnnyBG
What a numpty, I reckon macafee2 has it right, ...

What a numpty, I reckon macafee2 has it right, It's loose though so I should probably nip it.


Thanks for the thought, Trikey, but no EGR bypass. In fact I could probably do with a clean up in...
Forum: Technical Help Forum 8th December 2019, 19:58
Replies: 25
Views: 2,774
Posted By JohnnyBG
Rover 75 CDTi Tourer 2004 coolant

Well, shortly after the MoT that followed the £1k plus of work to get the Rover on the road again, the water pump packed up.


At the time I didn't have undercover access and got the garage that's...
Forum: Technical Help Forum 8th December 2019, 19:40
Replies: 3
Views: 570
Posted By JohnnyBG
Rover 75 CDTi Tourer 2004 what's this engine pipe for?

I've noticed a pipe on the nearside (passenger side) of the engine. It's loose and wobbly and looks like a brake pipe with a nipple on the end.


I was so pleased to get the HPFP, hydramount and...
Forum: Technical Help Forum 8th December 2019, 19:33
Replies: 54
Views: 39,110
Posted By JohnnyBG
Took a photo of T Cut post so I have it when the...

Took a photo of T Cut post so I have it when the invevitable happens on a lonely unlit road in the ice and snow.


All cars now are the same, changed one on the SEAT and it was hell.


On a...
Forum: The 75 and ZT Owners Club General Forum 26th November 2019, 21:31
Replies: 48
Views: 22,508
Posted By JohnnyBG
Forgot to say that in the How to it mentions the...

Forgot to say that in the How to it mentions the caliper retaining bolts at 13mm. I didn't have a combination spanner that size, bought one and then they were 17mm. I used a "C" spanner and got...
Forum: The 75 and ZT Owners Club General Forum 24th November 2019, 18:20
Replies: 48
Views: 22,508
Posted By JohnnyBG
Well, eventually got the stake nut off after...

Well, eventually got the stake nut off after warming it up and standing on the bar. The socket from Halfords not cheap but very robust.


Unfortunately the rear part of the bearing stayed on the...
Forum: Technical Help Forum 23rd November 2019, 20:28
Replies: 26
Views: 7,182
Posted By JohnnyBG
Reviving this old thread because it contains...

Reviving this old thread because it contains technical information about the oil. I'm doing this job next after the wheel bearing as I'm at 163,000 miles (and i've done at least 63,000 of them). ...
Forum: Technical Help Forum 23rd November 2019, 19:34
Replies: 4
Views: 752
Posted By JohnnyBG
Good job I took the nut with me because, as...

Good job I took the nut with me because, as stated in threads, it's actually 32mm in this case. The vernier said 34mm across flats but it was clearly too large. The 32mm isn't a completely tight...
Forum: I.C.E. Forum 22nd November 2019, 20:41
Replies: 29
Views: 14,567
Posted By JohnnyBG
I have the CR80 with the flap down thing for the...

I have the CR80 with the flap down thing for the CD. If you use the CD then the radio loses the code and all the settings so need to re-programme the channels.


I see in the how to stickies that...
Forum: Technical Help Forum 22nd November 2019, 20:20
Replies: 8
Views: 1,270
Posted By JohnnyBG
I have some of this to do too on my 75 cdti...

I have some of this to do too on my 75 cdti Tourer, but other things (rear wheel bearing tis weekend) more important. I have a stack of trim parts to do but don't know what the part numbers are for...
Forum: Technical Help Forum 22nd November 2019, 14:17
Replies: 4
Views: 752
Posted By JohnnyBG
Top notch - so I need the 13mm ring spanner as...

Top notch - so I need the 13mm ring spanner as well. I'll check my Torx set for a T50. I'll only be the second time I've used them.

The discs were replaced only 200 miles ago so things shouldn't...
Forum: Technical Help Forum 21st November 2019, 19:25
Replies: 4
Views: 752
Posted By JohnnyBG
75 Tourer rear disc Torx bolt set screw

I was looking at Podge's How to for the rear bearing which I'm doing this weekend.


What size is the Torx bit that is required for the disc set screw (assuming that's what I can see in the pics...
Forum: The 75 and ZT Owners Club General Forum 21st November 2019, 15:47
Replies: 48
Views: 22,508
Posted By JohnnyBG
Hope all went well on MoT. Mine passed with a...

Hope all went well on MoT. Mine passed with a noisy wheel bearing (unless I've just wasted my money and it was the tyre but I doubt it). Popping a cap off and checking I haven't got a socket to...
Forum: The 75 and ZT Owners Club General Forum 20th November 2019, 18:33
Replies: 7
Views: 1,661
Posted By JohnnyBG
In which case a made a mistake using a very...

In which case a made a mistake using a very little smear of Stag Welseal in the gasket between the HPFP and it's seat.


I've used it frequently on other engines and thought as it doesn't set and...
Forum: The 75 and ZT Owners Club General Forum 20th November 2019, 18:28
Replies: 10
Views: 2,349
Posted By JohnnyBG
Beautiful but why left so late? JohnnyBG

Beautiful but why left so late?


JohnnyBG
Forum: The 75 and ZT Owners Club General Forum 20th November 2019, 16:48
Replies: 48
Views: 22,508
Posted By JohnnyBG
Hi Had mine up on trolley jack and if...

Hi


Had mine up on trolley jack and if that's not a shot bearing IKBA.


Pal works at a motor factors and can get me a FAG bearing for £55. The SNR is online through Autodoc for £41 plus del...
Forum: Technical Help Forum 17th November 2019, 16:43
Replies: 178
Views: 276,826
Posted By JohnnyBG
Checked plenum passenger side. Water clearly...

Checked plenum passenger side. Water clearly drains out as none present despite the horrid weather over last few days. But couldn't get enough light in to see where to rod through!


I'll have...
Forum: Technical Help Forum 15th November 2019, 20:58
Replies: 12
Views: 1,987
Posted By JohnnyBG
"cable tie the EGR control valve to the starter...

"cable tie the EGR control valve to the starter motor"


So that is what the little devil is!


I have quite some experience with petrol engines but always got someone to do diesels for me and...
Forum: Technical Help Forum 13th November 2019, 18:11
Replies: 12
Views: 1,987
Posted By JohnnyBG
No such luck re FBH, there's not one. ...

No such luck re FBH, there's not one.


Arctic - the two wire plug into the unit (mostly white and red in your photo) seemed a bit short. However, I suppose it may work if I just fix one end on...
Forum: Technical Help Forum 12th November 2019, 11:38
Replies: 12
Views: 1,987
Posted By JohnnyBG
Arctic Thanks for your help, I just...

Arctic


Thanks for your help, I just didn't see the socket but your photos did the trick.


Primed up as advised by my pal and start first turn of the key. In tank and under bonnet pump work...
Forum: Technical Help Forum 12th November 2019, 08:38
Replies: 12
Views: 1,987
Posted By JohnnyBG
That's great!!! Don't you sleep? I'm...

That's great!!! Don't you sleep?


I'm confident that I'll be able to locate the socket thanks to you.


Looks like I need a bracket for the unit near where that lead comes from rather than it...
Showing results 1 to 150 of 164

 
Forum Jump

All times are GMT. The time now is 16:23.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright © 2006-2020, The Rover 75 & MG ZT Owners Club Ltd