Go Back   The 75 and ZT Owners Club Forums > Search Forums
Register FAQ Image Gallery Members List Calendar Search Today's Posts Mark Forums Read
Notices

Showing results 1 to 150 of 353
Search took 0.04 seconds.
Search: Posts Made By: david2000
Forum: Factory Fit Highline & Lowline Navigation Systems 20th February 2021, 00:55
Replies: 1
Views: 252
Posted By david2000
hello Kelvo the spare mk 4 dvd...

hello Kelvo
the spare mk 4 dvd unit that you have with the BMW splash screen you can change the splash screen and have the MG logo installed you can download the software to do it...
Forum: Technical Help Forum 14th February 2021, 20:12
Replies: 42
Views: 18,228
Posted By david2000
hi to all great idea could you post...

hi to all
great idea could you post a photo of the tool
david
Forum: I.C.E. Forum 14th February 2021, 20:04
Replies: 5
Views: 271
Posted By david2000
hello Atcchus you need to...

hello Atcchus
you need to check the k bus white/red/yellow cable there must be a break in this cable take the head unit out and you need to check this cable more than likely...
Forum: I.C.E. Forum 14th February 2021, 12:06
Replies: 5
Views: 271
Posted By david2000
hello disconnect the mk4 dvd unit and...

hello
disconnect the mk4 dvd unit and the screen should show a grey screen with 4 options try this first and let us know what happens
david
Forum: Technical Help Forum 12th February 2021, 19:46
Replies: 24
Views: 984
Posted By david2000
hello larry dmgrs are still...

hello larry
dmgrs are still tradeing
david
Forum: Technical Help Forum 11th February 2021, 20:00
Replies: 24
Views: 984
Posted By david2000
hello larry try DMGRS 75 / ZT...

hello larry
try DMGRS 75 / ZT CDTi Genuine Bosch MAF (Mass Airflow Sensor) - MHK101130 / MHK101131 MG Rover £169.99 or ebay with the following part numbers
david
Forum: Technical Help Forum 10th February 2021, 21:52
Replies: 24
Views: 984
Posted By david2000
hello larry since the car has...

hello larry
since the car has done 165.000 i would have a look at the egr take the pipe off and see if it is covered in oil if so the air intake manifold needs to come off and...
Forum: Technical Help Forum 10th February 2021, 18:46
Replies: 24
Views: 984
Posted By david2000
hello larry what is the...

hello larry
what is the mileage and when did you service the engine last also i will say again try and find someone with a T4 in your area on the T4 there is a real time overview...
Forum: Technical Help Forum 9th February 2021, 19:10
Replies: 24
Views: 984
Posted By david2000
hello larry try and find out if...

hello larry
try and find out if there is someone near you with a T4 Testbook with the testbook it will list the faults and you will be able to explore the fault in detail plus with...
Forum: Technical Help Forum 9th February 2021, 14:27
Replies: 24
Views: 984
Posted By david2000
hello larry did you use the T4...

hello larry
did you use the T4 Testbook or another diagnostic tool and did you clear the fault code
david
Forum: Technical Help Forum 8th February 2021, 23:17
Replies: 0
Views: 182
Posted By david2000
power steering fluid change

hi to all
how do i change the power steering fluid on a rover 75
david
Forum: Factory Fit Highline & Lowline Navigation Systems 4th February 2021, 00:33
Replies: 9
Views: 598
Posted By david2000
Hi to all have a look at the wry...

Hi to all
have a look at the wry cable there is a header under the carpet on the drivers side 2 members have reported that fault was found on this header try and see if you have...
Forum: Technical Help Forum 1st February 2021, 23:00
Replies: 7
Views: 402
Posted By david2000
hello biruss my 75 has the...

hello biruss
my 75 has the upgrade and all i wanted to do was to see if the xpower disk worked i do not want to change any thing i was given the info on how to find the 17 digit...
Forum: Technical Help Forum 1st February 2021, 18:58
Replies: 7
Views: 402
Posted By david2000
hello i can generate new zcs codes and...

hello
i can generate new zcs codes and checksum and i have manually entered new zcs codes as described by bigruss what i want to do is to see how the xpower works and see what the software...
Forum: Technical Help Forum 1st February 2021, 15:39
Replies: 7
Views: 402
Posted By david2000
hello i have a T4 and i have already...

hello
i have a T4 and i have already have the zcs codes and checksum now to run the xpower diesel tune upgrade i need a 17 digit code which is generated by the vin number so do you have an...
Forum: Technical Help Forum 31st January 2021, 22:32
Replies: 7
Views: 402
Posted By david2000
xpower diesel tune upgrade software

hi to all
i hope that there is someone that can help i have the DXT0002W xpower diesel tune upgrade software and it needs a 17 digit code to activate has anyone got any idea what the...
Forum: Technical Help Forum 23rd January 2021, 02:22
Replies: 15
Views: 783
Posted By david2000
my mistake 102,000

my mistake 102,000
Forum: Technical Help Forum 22nd January 2021, 22:31
Replies: 15
Views: 783
Posted By david2000
thank you russ for your reply how much would it...

thank you russ for your reply how much would it cost to remap the ecu and i post it to you and would it cause any problems the car has done 1002,000
david
Forum: Technical Help Forum 22nd January 2021, 21:38
Replies: 7
Views: 399
Posted By david2000
hi to all stainless steel exhaust...

hi to all
stainless steel exhaust manifold
Forum: Technical Help Forum 22nd January 2021, 20:18
Replies: 7
Views: 399
Posted By david2000
cdti stainless steel manifold

hi to all
the last couple of months i have been watching wheeler dealers car
s o s and they had stainless steel exhaust manifolds made for some of the cars they were restoring one was...
Forum: Technical Help Forum 22nd January 2021, 20:09
Replies: 15
Views: 783
Posted By david2000
rover 75 cdti tourer remap

hi to all
i have a question for big russ
reading the threads on this forum on remap the ecu the facelift diesel has to have the ecu remaped so is it done on the T4 with the X power...
Forum: Technical Help Forum 16th January 2021, 21:29
Replies: 9
Views: 432
Posted By david2000
have a good look at the tyres for any damage also...

have a good look at the tyres for any damage also check to see if the tyres are fitted correctly there is a direction arrow on the tyre to indicate the direction it should turn if the drivers tyre...
Forum: Technical Help Forum 15th January 2021, 23:48
Replies: 6
Views: 393
Posted By david2000
hello trickey you say that...

hello trickey
you say that you have changed a turbo on the 75 could you tell me how you did the job i have had a look and the 2 front bolts are accessible but the back bolt will...
Forum: Technical Help Forum 13th January 2021, 22:00
Replies: 2
Views: 289
Posted By david2000
turbo bolts

hi to all
what socket is required to remove the bolts that bolt the turbo to the manifold 3 of STC2212A
david
Forum: Technical Help Forum 13th January 2021, 14:17
Replies: 6
Views: 393
Posted By david2000
rover 75 cdti turbo

hi to all
this morning i took the pipe that goes from the turbo to the intercooler and there was some oil there how can i test the turbo to tell if the seals are leaking i cleaned the...
Forum: Technical Help Forum 9th January 2021, 19:45
Replies: 2
Views: 223
Posted By david2000
hi to all have a look at the...

hi to all
have a look at the photos in this link...
Forum: Technical Help Forum 20th December 2020, 09:40
Replies: 0
egr
Views: 171
Posted By david2000
egr

hi to all
when does the engine ecu open the egr
david
Forum: Technical Help Forum 14th December 2020, 21:51
Replies: 2
egr
Views: 199
Posted By david2000
egr

hi to all
has anyone used Wynns 23381 Diesel EGR and Air Intake Cleaner, MAF, 150ml or other and does it work it would save taking the egr/inlet manifold/intercooler off
david
Forum: Factory Fit Highline & Lowline Navigation Systems 5th December 2020, 21:55
Replies: 3
Views: 787
Posted By david2000
hi to all if you want to change the...

hi to all
if you want to change the splash screen you have to use navtweak there are full instructions on this forum and you need v32 and v32.2 you use v32 to go back then use v32.2 with...
Forum: Factory Fit Highline & Lowline Navigation Systems 1st December 2020, 19:23
Replies: 4
Views: 506
Posted By david2000
hi to all this is the cable that is...

hi to all
this is the cable that is required Fakra male to SMB female Satellite Radio Antenna Cable
david
Forum: Technical Help Forum 27th November 2020, 03:17
Replies: 1
Views: 294
Posted By david2000
m47 engine

hi to all
what is the torque setting for the crankshaft main bearing for the m47
david
Forum: Factory Fit Highline & Lowline Navigation Systems 21st November 2020, 22:58
Replies: 11
Views: 1,630
Posted By david2000
hi matt i have sent you a pm ...

hi matt
i have sent you a pm
david
Forum: Factory Fit Highline & Lowline Navigation Systems 21st November 2020, 13:38
Replies: 11
Views: 1,630
Posted By david2000
hi matt i am i correct you say that...

hi matt
i am i correct you say that the car was flooded if so then i would say that there is corrosion in the connectors some where you will have to check and if you have a multi meter...
Forum: Factory Fit Highline & Lowline Navigation Systems 20th November 2020, 23:51
Replies: 11
Views: 1,630
Posted By david2000
hi to all is your rover 75 tourer...

hi to all
is your rover 75 tourer a mk1 or facelift and have you checked the fuses in the passenger fuse box the header c0289 is on the drivers side
david
Forum: Factory Fit Highline & Lowline Navigation Systems 14th November 2020, 23:49
Replies: 4
Views: 506
Posted By david2000
hi to all it is a smb connector try...

hi to all
it is a smb connector try alliexpress try ebay SMB Male to SMB Female with Right Angle connectors 20cm RG174 Cable Lead
david
Forum: Technical Help Forum 9th November 2020, 02:24
Replies: 26
Views: 968
Posted By david2000
hi to all when the engine is hot...

hi to all
when the engine is hot put your hand on the top hose and see if there is hot water coming through also feel the heater pipes to see if they heat up i had this trouble and it...
Forum: Technical Help Forum 30th October 2020, 06:19
Replies: 2
Views: 320
Posted By david2000
rover 75 cdti crankshaft

hi to all
i have a question about the m47 crankshaft i have noticed that there is a bearing in the crankshaft where the flywheel and clutch assembly attach does the gearbox input shaft...
Forum: Technical Help Forum 29th October 2020, 23:41
Replies: 5
Views: 346
Posted By david2000
rover 75 cdti solid flywheel

hi to all
has anyone replaced the dmf on their rover 75 cdti for a solid flywheel
david
Forum: Technical Help Forum 29th October 2020, 00:53
Replies: 4
Views: 526
Posted By david2000
hello to all i googled how to...

hello to all
i googled how to test the dual mass flywheel and the gearbox has to come off then you will need to fit a special tool to test the d m f with it you can test for play...
Forum: Technical Help Forum 28th October 2020, 13:21
Replies: 4
Views: 526
Posted By david2000
rover 75 cdti dual mass flywheel

hi to all
how can i test to see if the dual mass flywheel needs to be replaced
david
Forum: Technical Help Forum 25th October 2020, 12:11
Replies: 11
Views: 552
Posted By david2000
hi to all i want to check the oil...

hi to all
i want to check the oil pressure but if i fitted a oil pressure gauge i could keep an eye on the oil pressure as i drive
david
Forum: Technical Help Forum 24th October 2020, 22:24
Replies: 13
Views: 590
Posted By david2000
hi to all at the moment i only...

hi to all
at the moment i only drive locally because of the virus and it is stop start so the clutch is working harder
Forum: Technical Help Forum 24th October 2020, 21:50
Replies: 13
Views: 590
Posted By david2000
rover 75 tourer cdti clutch

hi to all
my rover 75 cdti has now done 110,000 miles and as far as i am aware the clutch has not been replaced my question is what is the expected mileage for the clutch
david
Forum: Technical Help Forum 23rd October 2020, 10:12
Replies: 11
Views: 552
Posted By david2000
oil pressure gauge

hi to all
has anyone fitted a oil pressure gauge to a rover 75 diesel and is it possible and what should the oil pressure be when cold and hot
david
Forum: Technical Help Forum 21st October 2020, 17:35
Replies: 2
Views: 259
Posted By david2000
rover 75 tourer cdti clutch

hi to all
i would like to ask the members which make of clutch would they recommend to fit a rover 75 tourer cdti
oem from rimmers or bor n beck or lux or other
david
Forum: Factory Fit Highline & Lowline Navigation Systems 9th August 2020, 13:20
Replies: 1
Views: 488
Posted By david2000
mk 4 dvd unit

hi to all
what dvd work on the mk4 dvd unit is it a dvd-r or dvd-r or both
david
Forum: Factory Fit Highline & Lowline Navigation Systems 30th July 2020, 23:17
Replies: 2
Views: 788
Posted By david2000
hi to all if there is no disk in...

hi to all
if there is no disk in the drive it will show on the screen and if the drive is unable to read the disk it will show on screen
david
Forum: Factory Fit Highline & Lowline Navigation Systems 14th July 2020, 23:16
Replies: 3
Views: 787
Posted By david2000
splash screen

hello to all
I am trying to change the splash screen on my mk4 dvd unit I have the bmw software update V32.2 disk and update system V32 custom disk I have used navtweak and...
Forum: Items Wanted 3rd July 2020, 20:45
Replies: 5
Views: 644
Posted By david2000
MG ZTT/Rover 75 Tourer Harman Kardon System

hi to all
does anyone have a MG ZTT/Rover 75 Tourer Harman Kardon System
for a facelift rover 75 tourer for sale
david
Forum: Factory Fit Highline & Lowline Navigation Systems 28th June 2020, 19:00
Replies: 3
Views: 506
Posted By david2000
hi to all you say the satnav works...

hi to all
you say the satnav works but the radio does not does the tv work you wont have a picture but if you release the hand brake a message will appear on screen check the fuses ...
Forum: Factory Fit Highline & Lowline Navigation Systems 21st June 2020, 03:45
Replies: 0
Views: 443
Posted By david2000
facelift connector

hi to all
does any one have a wiring diagram for this 6 pin connector or photos of the connector in situ this connector is on the facelift rover 75 mg ztt for the highline satnav tv...
Forum: Factory Fit Highline & Lowline Navigation Systems 19th June 2020, 21:05
Replies: 0
Views: 387
Posted By david2000
rover 75 tourer facelift

hi to ps3000
you replied to my previous post on the rover 75 tourer facelift highline wiring loom part number I would like to ask you could you send me photos of the highline...
Forum: Technical Help Forum 14th June 2020, 21:37
Replies: 1
Views: 287
Posted By david2000
K line bus

hi to all
can some one tell me what colour wire is the ISO 9141-2 K line bus
david
Forum: Technical Help Forum 13th June 2020, 13:27
Replies: 2
Views: 350
Posted By david2000
ibus

hi to all
what colour wire is the k bus cable on the 75
david
Forum: Technical Help Forum 7th June 2020, 13:03
Replies: 1
Views: 337
Posted By david2000
rover 75 rear upper supension arm

hi to all
this is an update to a previous thread I was told that the captive nut could fail if seized and the subframe will then have to be taken off so I had this idea I made a tool to...
Forum: Factory Fit Highline & Lowline Navigation Systems 2nd June 2020, 22:23
Replies: 2
Views: 836
Posted By david2000
hi to all the parts you need are...

hi to all
the parts you need are still available the mk 4 dvd unit the radio amplifier module and the tv module but if you want digital radio and tv have a look at my post rover 75 video...
Forum: Technical Help Forum 30th May 2020, 01:14
Replies: 11
Views: 793
Posted By david2000
hi to all read the thread and I have...

hi to all
read the thread and I have ordered acetone and fully synthetic auto transmission oil and I will try it I have a tip to share when I will be reassembling all the bolts will be...
Forum: Technical Help Forum 29th May 2020, 20:06
Replies: 11
Views: 793
Posted By david2000
hi to all update jacked up the car...

hi to all
update jacked up the car and had a look to see where the captive nut was located I could get my hand between the body and the subframe and I could feel the captive nut so I was...
Forum: Technical Help Forum 29th May 2020, 18:42
Replies: 11
Views: 793
Posted By david2000
hi to all thanks to all for their...

hi to all
thanks to all for their help I have sprayed with wd40 but I could not see the captive nut with the photos posted I can now look to see if I can see where to spray the captive...
Forum: Technical Help Forum 27th May 2020, 13:08
Replies: 11
Views: 793
Posted By david2000
rover 75 rear upper supension arm

hi to all
had the mot yesterday and it failed on the rear upper suspension arms I have had a look and three bolts are easily to remove but I cannot see how to remove the bolt that bolts...
Forum: Factory Fit Highline & Lowline Navigation Systems 8th May 2020, 21:51
Replies: 14
Views: 2,092
Posted By david2000
hi to all as asked by Swordy hear...

hi to all
as asked by Swordy hear are the links for the dvb-t tuner how to and where to get the dvb-t tuner and the dvb-t2 tuner
http://pibus.info/tv/ this is site tells you how to and...
Forum: Technical Help Forum 7th May 2020, 10:54
Replies: 0
Views: 320
Posted By david2000
rover 75 ignition switch

hi to all
on the rover 75 the ignition switch assemble is secured by two security screws can any one tell me what torx bits I need
david
Forum: Factory Fit Highline & Lowline Navigation Systems 4th May 2020, 09:31
Replies: 14
Views: 2,092
Posted By david2000
hi to all yes I do have a digital...

hi to all
yes I do have a digital tv and radio one I converted my self bought the ptv board and tuner from a company from china and the simplest video unit to convert is the video unit...
Forum: Factory Fit Highline & Lowline Navigation Systems 4th May 2020, 02:37
Replies: 14
Views: 2,092
Posted By david2000
hi to all found information on...

hi to all
found information on the internet you can unlock the tv but you need a nav decoder software and k bus interface to do so the software navdecoder I have downloaded and tried...
Forum: I.C.E. Forum 3rd May 2020, 21:48
Replies: 3
Views: 2,015
Posted By david2000
hi to all on my 75 the radio...

hi to all
on my 75 the radio remembered the code so you should be ok but if you are concerned that the code will need to be re entered then what you could do is attach a jump...
Forum: Factory Fit Highline & Lowline Navigation Systems 3rd May 2020, 01:29
Replies: 0
Views: 379
Posted By david2000
ibus

hi to all
does the land rover l322 video module have a ibus
david
Forum: Factory Fit Highline & Lowline Navigation Systems 2nd May 2020, 19:11
Replies: 14
Views: 2,092
Posted By david2000
hi to all found this on the...

hi to all
found this on the internet
Set ignition to position II
Enter t.v mode
Enter settings
Enter contrast or brightness
When the green contrast bar is visible, push the knob...
Forum: Factory Fit Highline & Lowline Navigation Systems 2nd May 2020, 10:41
Replies: 14
Views: 2,092
Posted By david2000
rover 75 video module

hi to all
the video module fitted to my rover 75 highline started to play up so I bought another land rover l322 yil000322 037138080 unit which was a widescreen unit now the old unit I...
Forum: Factory Fit Highline & Lowline Navigation Systems 24th March 2020, 19:08
Replies: 2
Views: 884
Posted By david2000
thank you it will help with...

thank you
it will help with my search for one
david
Forum: Factory Fit Highline & Lowline Navigation Systems 9th March 2020, 05:11
Replies: 2
Views: 884
Posted By david2000
rover 75 tourer facelift

hi to all
does anyone on this forum own a rover 75 tourer facelift or a mg zt tourer facelift with a factory fitted highline satnav tv I want to ask if they could have a look at the...
Forum: Factory Fit Highline & Lowline Navigation Systems 9th March 2020, 00:13
Replies: 0
Views: 391
Posted By david2000
changeing low line in higghline satnav

hi to all
while I was google rover 75 highline navigation I came across a post on changing low line in highline satnav can someone show me where this post is on this forum
david
Forum: Technology Forum 5th March 2020, 02:51
Replies: 1
Views: 569
Posted By david2000
mg rover epc

hello to all
I have the mg rover epc programme and it does not recognize my registration how can I solve this it does recognize reg 51 52 53 54 but not o3 04 05 regs can anyone...
Forum: Technical Help Forum 4th March 2020, 14:53
Replies: 0
Views: 370
Posted By david2000
mg rover epc

hi to all
I have the mg rover electronic parts catalog and it wont recognize 03 04 05 reg has anyone else had the same problem and could some one try this reg BX04WKT to see if it...
Forum: Factory Fit Highline & Lowline Navigation Systems 17th February 2020, 00:19
Replies: 4
Views: 814
Posted By david2000
hi to all if the motor is...

hi to all
if the motor is working you can get a cable kit from germany to repair your window regulator
david
Forum: Factory Fit Highline & Lowline Navigation Systems 26th January 2020, 21:05
Replies: 2
Views: 604
Posted By david2000
hi to all I have tried igo but I...

hi to all
I have tried igo but I cant find ersin on the igo web site so how did you down load the updates
david
Forum: Factory Fit Highline & Lowline Navigation Systems 26th January 2020, 19:50
Replies: 2
Views: 604
Posted By david2000
erisin head unit

hi to all
has anyone fitted a erisin unit to a 75 and how do you update the sat nav which is on a micro sd card
david
Forum: Factory Fit Highline & Lowline Navigation Systems 21st January 2020, 21:56
Replies: 14
Views: 2,120
Posted By david2000
hi to all if you want to upgrade...

hi to all
if you want to upgrade from analog to digital you can do it your self have a look at this site of how to do it http://pibus.info/tv/ then for the dvb-t tuner or the dvb-t2...
Forum: Factory Fit Highline & Lowline Navigation Systems 1st December 2019, 23:32
Replies: 3
Views: 1,010
Posted By david2000
hello is your 75 tourer a mk1 or the...

hello
is your 75 tourer a mk1 or the facelift there is a difference in the wiring looms so make sure you get the right loom and remember you will need the dvd or cd unit plus the tv unit...
Forum: Factory Fit Highline & Lowline Navigation Systems 1st December 2019, 23:24
Replies: 4
Views: 759
Posted By david2000
hello is the disk an original or a...

hello
is the disk an original or a copy I have had this trouble and found that it was a faulty disk so what you can do is copy the disk on to a good quality disk and does the power light...
Forum: Factory Fit Highline & Lowline Navigation Systems 30th November 2019, 22:11
Replies: 3
Views: 897
Posted By david2000
I have had the same trouble what I did was took...

I have had the same trouble what I did was took the unit out and put it in the airing cupboard for a few days then refitted and it worked ok also the disc I made a new copy do you have the mk3 cd...
Forum: Technical Help Forum 10th November 2019, 21:39
Replies: 1
Views: 416
Posted By david2000
retro fit xenon headlights

hi to all
my 75 has halogen headlights with a lsm manual headlight beam height adjuster so if I fit the xenon headlights how do I get the beam height adjuster to work
david
Forum: Technical Help Forum 10th November 2019, 13:54
Replies: 2
Views: 368
Posted By david2000
xenon headlights

hi to all
how do the xenon headlights adjust are they self adjusting or do they have to be manually adjusted
david
Forum: Items Wanted 3rd November 2019, 21:04
Replies: 1
Views: 572
Posted By david2000
facelift rover 75 xenon headlamps

hi to all
xenon headlamps wanted for a rover 75 facelift
david
Forum: Technical Help Forum 4th October 2019, 06:35
Replies: 0
Views: 268
Posted By david2000
fuel pressure

hi to all
I have a question about the t4 live data
I noticed that when you switch the ignition on the low pressure live data reads 340 kpa when the pump is running then when the pump...
Forum: Technical Help Forum 30th September 2019, 22:44
Replies: 3
Views: 439
Posted By david2000
hi to all yes £200 from land...

hi to all
yes £200 from land rover
david
Forum: Technical Help Forum 30th September 2019, 20:13
Replies: 3
Views: 439
Posted By david2000
pireburg fuel pressure relief valve

hi to all
in a previous thread I asked if anyone could tell me the part number of the pireburg fuel pressure relief valve well after a long search on the internet I have found the part...
Forum: Technical Help Forum 30th September 2019, 08:11
Replies: 10
Views: 1,092
Posted By david2000
Hi to all so this upgrade...

Hi to all
so this upgrade stops the oil from circulating to the inlet manifold
david
Forum: Technical Help Forum 29th September 2019, 23:01
Replies: 10
Views: 1,092
Posted By david2000
crankcase breather

hi to all
has anyone fitted one of these to their rover 75 diesel Crank Case Breather kit Fit Land Rover Freelander and here is a link and does it work...
Forum: Technical Help Forum 22nd September 2019, 12:31
Replies: 2
Views: 408
Posted By david2000
in tank pump replacement

hi to all
I have looked into the Peugeot in tank pump replacement for the rover 75 and here are the part numbers of the Peugeot pump that will fit
Reference OE/OEM Number: ...
Forum: Technical Help Forum 21st September 2019, 18:48
Replies: 1
Views: 333
Posted By david2000
antifreeze

hi to all
what water should be mixed with antifreeze is it distilled water or de-ionized water or ran water
david
Forum: Technical Help Forum 15th September 2019, 04:56
Replies: 1
Views: 362
Posted By david2000
Thermostat

Hi to all
how easy is it to change the thermostat on the rover 75 cdti and what is the correct procedure as i have seen on youtube you place a jack under the engine then remove...
Forum: Technical Help Forum 15th September 2019, 04:42
Replies: 8
Views: 607
Posted By david2000
hi to all EGR FAULT SORTED I DID...

hi to all
EGR FAULT SORTED I DID SOME GOOGLEING AND FOUND OUT THAT THE SOLENOID IS OPENED WHEN THE ENGINE IS HOT AND UNDER LOAD THAT IS WHEN THE EGR RECYCLES THE GASES FRON THE...
Forum: Technical Help Forum 14th September 2019, 23:08
Replies: 8
Views: 607
Posted By david2000
hi to all I think I have found the...

hi to all
I think I have found the fault it is in connector co606 19 scr cable where does this cable go to from the ecu
david
Forum: Technical Help Forum 14th September 2019, 21:29
Replies: 3
Views: 401
Posted By david2000
Hello john i changed my hp...

Hello john
i changed my hp pump this week and it took me 5 hours i bought mine from car parts 4 less they were the cheepest and it was a lucas pump the hardest job was geting the...
Forum: Technical Help Forum 14th September 2019, 17:20
Replies: 8
Views: 607
Posted By david2000
hi bigruss yes but the EGR is...

hi bigruss
yes but the EGR is not opening there is voltage going to the solenoid the brown/grey wire from the solenoid to the ECU is ok now if I am correct from the ECU it goes to...
Forum: Technical Help Forum 14th September 2019, 11:26
Replies: 8
Views: 607
Posted By david2000
hi to all this morning I checked...

hi to all
this morning I checked the wiring there is voltage going to RW red/white cable then I checked the nu brown/grey cable NU going to the ECU connector c0606 and there is no...
Forum: Technical Help Forum 14th September 2019, 01:20
Replies: 8
Views: 607
Posted By david2000
Hi to all t4 says there is a...

Hi to all
t4 says there is a egr fault and i have taken the solenoid off and you can blow through it and if i am correct the solenoid should open when the ecu sends a signal but i...
Forum: Technical Help Forum 13th September 2019, 21:38
Replies: 8
Views: 607
Posted By david2000
solenoid egr

hi to all
how does the egr solenoid work
david
Forum: Technical Help Forum 12th September 2019, 17:41
Replies: 3
Views: 573
Posted By david2000
hi arctic I bought a new pump and...

hi arctic
I bought a new pump and I have not thought about fitting new seals
david
Forum: Technical Help Forum 11th September 2019, 20:35
Replies: 3
Views: 573
Posted By david2000
cdti high pressure pump

hi to all
GOOD NEWS changed the high pressure pump today and the engine started first turn of the key Brian here are readings with the engine running
low pressure sensor 371.3 KPA
...
Forum: Technical Help Forum 10th September 2019, 01:00
Replies: 2
Views: 494
Posted By david2000
hi to all I tested the voltage...

hi to all
I tested the voltage to the pressure regulator and it was 12v I shall try the other cable tomorrow weather per mating as for testing the ubp I connected a pressure tester...
Forum: Technical Help Forum 9th September 2019, 21:09
Replies: 2
Views: 494
Posted By david2000
rover 75 cdti high pressure pump

hi to all
I have a question about the high pressure pump
recently I changed the ubp as I have mentioned in previous threads now I tested the ubp and it had a pressure out put of 400...
Forum: Technical Help Forum 8th September 2019, 22:53
Replies: 16
Views: 1,188
Posted By david2000
hi to all I looked in the how to...

hi to all
I looked in the how to but could not find anything I have a question though what is the lowest pressure and the highest pressure be on the low pressure side of the fuel...
Forum: Technical Help Forum 8th September 2019, 13:17
Replies: 18
Views: 943
Posted By david2000
hi to all I have had a similar...

hi to all
I have had a similar fault disconnect the battery leave the air bags discharge then disconnect the connectors under the driver seat and spray with WD40 it works for me
david
Forum: Technical Help Forum 8th September 2019, 11:28
Replies: 10
Views: 955
Posted By david2000
hello Brian the reading for...

hello Brian
the reading for the low pressure when cranking is 375 kpa which is 3.75 bar
david
Forum: Technical Help Forum 8th September 2019, 01:04
Replies: 10
Views: 955
Posted By david2000
hello Brian I have been...

hello Brian
I have been looking at the wiring diagrams and the fuel pressure regulator gets it power from the engine fuse box F1 from there it goes to connector c0450 c0160-3 then...
Forum: Technical Help Forum 7th September 2019, 23:10
Replies: 10
Views: 955
Posted By david2000
hello brian do you mean...

hello brian
do you mean synchronized by going into immobiliser and resyn
if so yes
david
Forum: Technical Help Forum 7th September 2019, 20:19
Replies: 16
Views: 1,188
Posted By david2000
Hi to all this afternoon i...

Hi to all
this afternoon i changed the sensor on common rail and the regulator on the pump nothing doing so it can only be the pump are the o rings in the pump
david
Forum: Technical Help Forum 7th September 2019, 13:43
Replies: 10
Views: 955
Posted By david2000
Injector pump fuel regulator

Hi to all
can anyone tell me what torx bit i need for the torx screws on the injector pump fuel pressure regulator
david
Forum: Technical Help Forum 7th September 2019, 11:02
Replies: 16
Views: 1,188
Posted By david2000
hello Brian here are the...

hello Brian
here are the readings low pressure 379 kpa high pressure fuel rail ZERO I will send you a photo
david
Forum: Technical Help Forum 7th September 2019, 10:46
Replies: 16
Views: 1,188
Posted By david2000
hello Brian I have sent you...

hello Brian
I have sent you a photo of my t4 check your email and in the next half hour I will have the info you want
david
Forum: Technical Help Forum 6th September 2019, 22:59
Replies: 16
Views: 1,188
Posted By david2000
hello Brian ok so I need to...

hello Brian
ok so I need to have the overview screen on the t4 then crank the engine and see the readings is this correct I shall try tommorow
I have one question does the...
Forum: Technical Help Forum 6th September 2019, 22:00
Replies: 16
Views: 1,188
Posted By david2000
hi brian I cant give you live data...

hi brian
I cant give you live data the engine wont start the fault on the ecu is pre delivery pressure monitoring how can I test to see if there is power going to the injectors
david
Forum: Technical Help Forum 6th September 2019, 20:32
Replies: 16
Views: 1,188
Posted By david2000
rover 75 diesel wont start

hi to all
this morning I started the engine then after 30 seconds it stopped and would not start under bonnet pump is working and good pressure then I asked a friend to give me a hand...
Forum: Technical Help Forum 2nd September 2019, 21:09
Replies: 20
Views: 1,351
Posted By david2000
hi to all I think I have found...

hi to all
I think I have found what is causing the fault it is the pierburg vale that is between the fuel filter and the ubp this is what I tried I clamped the pipe and went for a drive...
Forum: Technical Help Forum 2nd September 2019, 05:03
Replies: 20
Views: 1,351
Posted By david2000
hi to all I have just remembered...

hi to all
I have just remembered when I went to view the car I was told that I could not go far for a test drive as there was hardly any diesel in the tank and the fuel gauge was below...
Forum: Technical Help Forum 2nd September 2019, 03:59
Replies: 20
Views: 1,351
Posted By david2000
hi to all yes the car starts and...

hi to all
yes the car starts and runs ok but t4 says there is intermittent low fuel pressure and I am trying to find out why t4 is saying intermittent low fuel pressure when every thing...
Forum: Technical Help Forum 31st August 2019, 21:21
Replies: 20
Views: 1,351
Posted By david2000
hi to all tonight I connected a...

hi to all
tonight I connected a pressure tester to the pump and to the fuel line turned on the ignition and there was no pressure there and if you look in rave it says there that the...
Forum: Technical Help Forum 30th August 2019, 20:15
Replies: 20
Views: 1,351
Posted By david2000
hi to all tonight I have tested...

hi to all
tonight I have tested the in tank pump and there is no pressure at all and I asked jules what pressure the pump he was selling and he replied
3.5 bar
david
Forum: Technical Help Forum 30th August 2019, 12:45
Replies: 20
Views: 1,351
Posted By david2000
hi to all it started when t4 said...

hi to all
it started when t4 said there was a intermittent low fuel pressure so I tested the under bonnet pump and the fuel pressure was low so I bought a new pump this did not solve...
Forum: Technical Help Forum 30th August 2019, 11:21
Replies: 20
Views: 1,351
Posted By david2000
hello artic t4 shows a fault...

hello artic
t4 shows a fault low fuel pressure I have changed the under bonnet pump and the fuel pressure has improved but the fault is still there also I timed the under bonnet pump...
Forum: Technical Help Forum 30th August 2019, 03:27
Replies: 20
Views: 1,351
Posted By david2000
rover 75 diesel in tank fuel pump

hi to all
in the how to I read how to replace the in tank fuel pump but which intank pumps and where can I get one
david
Forum: Technical Help Forum 24th August 2019, 13:41
Replies: 1
Views: 343
Posted By david2000
imobilizer bolts

hi to all
can any one tell me what torx bit I need to remove the imobilizer on my rover 75
david
Forum: Technical Help Forum 5th August 2019, 21:48
Replies: 6
Ipk
Views: 548
Posted By david2000
the message lcd on the instrument panel is all...

the message lcd on the instrument panel is all lines so a lcd message screen is needed but can the T4 return the instrument panel back to a virgin state
david
Forum: Technical Help Forum 5th August 2019, 20:38
Replies: 6
Ipk
Views: 548
Posted By david2000
did you use a t4 to reprograme the instrument...

did you use a t4 to reprograme the instrument panel to work on your car
david
Forum: Technical Help Forum 5th August 2019, 20:08
Replies: 6
Ipk
Views: 548
Posted By david2000
Ipk

hi to all
can a IPK from another car be reprogramed to work on my car
david
Forum: Technical Help Forum 19th July 2019, 01:21
Replies: 7
Views: 1,093
Posted By david2000
hi to all thank you brian for the...

hi to all
thank you brian for the info one question when disconnecting and reconnecting does the battery need to be disconnected
all the best david
Forum: Technical Help Forum 18th July 2019, 22:46
Replies: 7
Views: 1,093
Posted By david2000
hi to all I have a T4 and all I...

hi to all
I have a T4 and all I need to know is how easy is it using the T4 to replace the old DDE ecu for a new DDE ecu
all the best david
Forum: Technical Help Forum 18th July 2019, 22:17
Replies: 7
Views: 1,093
Posted By david2000
dde ecu replacement

hi to all
how easy is it to replace a DDE ECU using the T4 and what is the procedure
all the best david
Forum: Technical Help Forum 29th June 2019, 00:48
Replies: 0
Views: 397
Posted By david2000
rover 75 tourer rear and front brake pipe replacement

hi to all
I am going to replace the rear and front brake pipes on my rover 75 tourer with the help of a friend who has a pit now here is my question for marinabrian how would you go...
Forum: Technical Help Forum 28th June 2019, 18:48
Replies: 4
Views: 533
Posted By david2000
thank you brian for your help I should have...

thank you brian for your help
I should have mentioned that I am also replacing the front pipes as well I don't know yet if I will be replacing the pipes that go from the connector
to the abs unit...
Forum: Factory Fit Highline & Lowline Navigation Systems 27th June 2019, 21:53
Replies: 3
Views: 937
Posted By david2000
hi there is your car a mk1 model...

hi there
is your car a mk1 model or a face lift if it is a mk1 then the power connector is located on the left and to get at it you will need to remove the head unit the air con control...
Forum: Factory Fit Highline & Lowline Navigation Systems 27th June 2019, 21:03
Replies: 2
Views: 829
Posted By david2000
hi there in my opinion the fault...

hi there
in my opinion the fault is with the display screen it is a LCD screen and they do loose pixels over a period of time do you know any one who has a spare that works so that you...
Forum: Technical Help Forum 27th June 2019, 20:54
Replies: 4
Views: 533
Posted By david2000
brake pipes

hi to all
I am going to change the rear and front brake pipes next week and my question is the rear pipes go to the front of the car to a union and I noticed that one of the pipe...
Forum: Technical Help Forum 26th June 2019, 22:13
Replies: 2
Views: 533
Posted By david2000
front suspension

hi to all
have a question I recently bought a new front shock absorber for my 75 tourer to day I went to change the shock absorber and after I had dismantled the shock and went to fit...
Forum: Items Wanted 21st June 2019, 22:32
Replies: 0
Views: 401
Posted By david2000
spring compressor

hi to all
I am looking for a mg rover spring compressor tool part number
18G 1516 does anyone have one
all the best
david
Forum: Technical Help Forum 21st July 2018, 04:51
Replies: 1
Views: 443
Posted By david2000
rover 75 dde ecu

hi to all
when you use the t4 to replace the diesel dde ecu for a new ecu can the original ecu be kept as a spare or is the ecu wiped clean by the t4
all the best david
Forum: Technical Help Forum 5th June 2018, 22:11
Replies: 17
Views: 1,299
Posted By david2000
hello to all the injector will...

hello to all
the injector will be tight and should be prised out do you have a replacement injector and are you able to tackle the job your self
david
Forum: Technical Help Forum 28th May 2018, 17:31
Replies: 2
Views: 456
Posted By david2000
hi to all it goes on the gear selector se...

hi to all
it goes on the gear selector se photo
yes this bush is fitted to all rover 75 with manual transmission and this bush is part of the gear
selector assembly and the assembly is no...
Forum: Technical Help Forum 28th May 2018, 04:25
Replies: 2
Views: 456
Posted By david2000
Smile manual gearbox gear selector

hi to all
here is an update on the manual gearbox gear selector bush I have been able to make a bush out of cast ally and I tried it on my gearbox and it works great if anyone wants one please PM me...
Forum: Technical Help Forum 26th May 2018, 10:11
Replies: 6
Views: 1,484
Posted By david2000
hi to all this morning I tried an...

hi to all
this morning I tried an experiment the spare gearbox I have I took the gear selector off and tried the nylon bush from my car on the spare gearbox and there was play in the...
Forum: Technical Help Forum 26th May 2018, 01:19
Replies: 8
Views: 1,000
Posted By david2000
hi to all is there excessive play...

hi to all
is there excessive play in your gear stick
david
Forum: Technical Help Forum 25th May 2018, 22:03
Replies: 6
Views: 1,484
Posted By david2000
hi to all today I replaced the...

hi to all
today I replaced the nylon bush on the gear selector and now there is no excessive play in the gear stick and it now changes gear beautifully
david
Forum: Technical Help Forum 24th May 2018, 21:02
Replies: 6
Views: 1,484
Posted By david2000
hi to all no it is not the nylon bushes on the...

hi to all
no it is not the nylon bushes on the cables
the cables connect to the gear selectors one selector Lifts and pushes the main gear selector on this there is a nylon bush and on mine this...
Forum: Technical Help Forum 23rd May 2018, 22:50
Replies: 6
Views: 1,484
Posted By david2000
manual gearbox gear selector

hi to all
on Monday I had difficulty selecting gear on my rover 75 tourer manual diesel,so today my friend and I had a look to see what was wrong took the battery and battery box off so...
Forum: Technical Help Forum 19th May 2018, 21:05
Replies: 12
Views: 2,301
Posted By david2000
hello to all as I am going to...

hello to all
as I am going to change the front flexible hoses I will be changing the brake fluid as I think that it hasn't be changed since the car
has been built
david
Forum: Technical Help Forum 18th May 2018, 01:33
Replies: 12
Views: 2,301
Posted By david2000
thank you Mercury RV for your offer of front...

thank you Mercury RV for your offer of front brake hoses but I have already bought a pair of oem parts and as to having a look at other threads on this site I have already done so and Big Russ says...
Forum: Technical Help Forum 17th May 2018, 22:34
Replies: 12
Views: 2,301
Posted By david2000
rover 75 brake bleeding

hi to all
the car had a m.o.t yesterday and there was a advisory on the front flexible brake hoses question do you need to use the T4 testbook
to bleed the brakes correctly and can...
Forum: Technical Help Forum 15th December 2017, 22:02
Replies: 1
Views: 376
Posted By david2000
Rover 75 & MG ZT Rear Number Plate Light Lamp Plinth Circuit Board

HI TO ALL
THE REAR NUMBER PLATE UNIT ON MY TOURER IS HELD ON WITH TORX BIT SCREWS WITH A HOLE IN THE MIDDLE CAN ANYONE TELL ME WHICH TORX BIT IS NEEDED
DAVID:icon_confused:
Forum: Factory Fit Highline & Lowline Navigation Systems 15th November 2017, 20:58
Replies: 1
Views: 576
Posted By david2000
hi line antena

:} hi to all
this topic may seem strange to members but can anyone tell me what signal does the ROVER 75 MG ZT TOURER ESTATE SHARK FIN SAT NAV AERIAL XUC100950 XUM000020 pick up is it a digital...
Showing results 1 to 150 of 353

 
Forum Jump

All times are GMT +1. The time now is 21:48.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright © 2006-2020, The Rover 75 & MG ZT Owners Club Ltd