12 volt supply for anscillaries.
Hi guys
I have a number of extra units to use with my Navall 'Star'.
This means I have to find 3 or 4 extra 12v supplies.
It appears they will have to come from the ISO connector lead that plugs into 'Star'
There are two 12v sources, one Yellow non ign feed, and one Red ign fed.
How would you advise feeding these extras. Should I take them all from the Yellow 12v, or should I split them between the yellow & Red.
I can't see that there is any other way other than tap into these two 12v feeds.
Any advice welcome, thank you.
trimani (ALF)
|