Quote:
Originally Posted by Mike Noc
I've had the same problem Frank, and tightened the bolt up that holds the bearing in place. It is a left handed thread and you need to get an open ended spanner on the nut behind the bearing.
Once the belt was off I backed the nut off and put a few drops of Loctite behind it before retightening to help prevent it happening again.
|
Dear Mike, many thanks for the information. Seems a NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- stupid way of doing things, but hey ho, it is what it is.
Lord knows how I will get a spanner on the back, but you have told me it can be done, which is an enormous help. A lot more help than Haynes too!
Best wishes, Frank B