Quote:
Originally Posted by ZedTeeTee
Firstly, thank you Dave for your continued help - it is most appreciated
Secondly, I have given 12v directly to the relevant wires on the connector, and both mirrors fold / unfold as they should. I've checked both fuses and they are also fine.
I have to assume then, at this point, the switch pack is most likely faulty?
|
If there working as they should when power is applied to the plug on the rear of the switch pack then I’d expect the fault to be within the switch pack.
I’d take it apart and give it all a clean and also check the pins on the underside of the switch pack one of these could be bent/damaged when plugged was fitted preventing the signal being sent.
If you have a member close by you could swap switch packs to confirm it’s faulty if the above doesn’t fix it.
Sent from my iPhone using Tapatalk