Victoire!
LH side.
Above: that spring looks in remarkably good nick. New ones going on anyway.
Below is the tricky little blighter - I used Steve's method to shift the lower arm out of it. Fifteen minutes of 'tapping' (
) via a block of 2x2 and it finally popped out. A good dollop of Förch Black Magic too. I'll use Brian's method on the RH side just to see which is easier/faster.
Not much wrong with this wheel arch. The usual surface rust on spot welds and a bit on those seams and that's it. The loom needs re-taping too (not visible in this pic). I'm very impressed with the bodies on these cars.
More pics and a few questions later - need more tea now.