Quote:
Quote:
Originally Posted by Blink
PS. Rimmers driveshaft page is fairly useless now - most of the key parts have been deleted from the listing.  |
|
Hi Simon.
A small flat blade screw drive under the clip edge marked with the yellow dots will lift the part that's got the tags showing through.
The use screw driver in the clip that as been squashed together to make them tight. green arrow pointer
1
PS a few of these maybe of use to you as well, they must be good before putting the drive shaft back in, also when removing the drive shaft pull it out in a straight line no downward or upward movement as the seals are easy damaged, then when you come to refit the drive shafts you will have a leak.
https://rimmerbros.com/Item--i-TDL100170