Quote:
Quote:
Originally Posted by billh
Thanks, it isn't the switch, I get the long beep from the system to say there's a fault as soon as reverse is engaged. The wiring behind the bumper is in a mess so probably needs replacing back to the parking aid ECU, if only I knew where it was!
|
|
Hi Robert.
It will be where you said it was, also i would have the rear bumper off first and check the wiring at the joints for corrosion it will shows as green or black.
Do you have a CD changer in that area?
1
If so it needs to be removed to gain access to the parking aid.
2
Then there will be the cage frame to remove.
3
4
Once the frame is pulled forward you will see the parking aid.
5
Unclip the plug/wiring connectors.
6
7
8
Do both the black & white connectors.
9
10
Pull the latch toward you.
11
It will then lift out.
12
Check for corrosion in the plugs & parking aid, clean with switch contact cleaner only.
13
Hope these help.