Quote:
Originally Posted by SCP440
Who ever thought this was a good idea? He needs shooting and hanging.
I helped a friend with his car today with such a device. When you switch the car off the handbrake is automatically applied and this is the problem. You switch it off and you either are lucky enough to have an electronic device to put the handbrake in service mode and wind the pistons back or while it is running unplug the motors so the car cant put the brake on.
The first way is the preferable but not every one knows some one who has one of these devices and the second way can bring up a fault code that can only be cleared by the above tool.
You would presume if it was winding back the pistons electrically it would do the job properly, oh no you still need a piston wind back tool and because the motor is in the system was a complete mare and took a lot of patience, no wonder the dealer reckoned it was a 3 hour job and they have done it many times before.
If I was buying a newer car and there was a switch instead of a lever I would seriously consider my options as the car I did today had only covered 20k miles from new so this is going to be an ongoing job.
The more I see new cars the less I like them.
|
The answer is to press and hold the park brake button down and then switch the engine off. Make sure the car can’t roll away though.