The 75 and ZT Owners Club Forums - View Single Post

Mike Noc · 14th April 2017, 20:06

If you have access to an arc welder weld a nut around the old bolt head with the current up as high as you can.

The heat will expand the bolt and help loosen it when it cools down. Once the heat has dissipated into the hub spray freezing penetrating oil on the bolt and with a decent socket and breaker bar or your rattle gun it should move.

.

14th April 2017, 20:06	#47
Mike Noc This is my second home Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009 Location: Hampshire Posts: 11,550 Thanks: 3,470 Thanked 3,119 Times in 2,247 Posts	If you have access to an arc welder weld a nut around the old bolt head with the current up as high as you can. The heat will expand the bolt and help loosen it when it cools down. Once the heat has dissipated into the hub spray freezing penetrating oil on the bolt and with a decent socket and breaker bar or your rattle gun it should move. . Last edited by Mike Noc; 23rd April 2017 at 12:23..