Quote:
Originally Posted by AndyN01
I think what's happened is that as you've polished the lights, they have got warm.
The warm air has nowhere to easily escape (unless you take out a bulb or two) and takes on water vapour from the atmosphere.
When the light cools down - hey presto - condensation.
This slowly evaporates off through the small gaps around the bubs.
No harm done.
Happy to hear other ideas and explanations.
Andy.
|
There is actually a breather port in the lights so it should dry naturally, you can accelerate the drying by pulling off the rubber caps and letting a hair drier blow through the hole for 20 mins...