Quote:
Originally Posted by raykay
Earth connection to the top terminal of the left connector in the diagram, 12v feed to bottom left. Also 12v to the centre (common) terminal on the right connector and feed to FBH to the bottom (normally open) terminal.
When the 'On' button is pressed, the common terminal is connected to the normally open terminal, which will switch on the FBH.
|
Hi Ray,
You'll see from my post no. 2 that I've explained how to wire the remote control receiver (except you've swapped the connections on the output, any reason for that?). What Heddy's asking now is something about pin 3 on the FBH.
Can you help him with that?
Simon