The 75 and ZT Owners Club Forums - View Single Post

SD1too · 8th June 2021, 11:45

Hi Billy,

I had trouble with one of my anti-roll bar bush screws (with the tiny 10mm AF heads). What you need is Irwin bolt extractors.

Don't give up on what you're doing. Once the ARB is out of the way you'll be able to use a socket on both lower arm (it's not a wishbone!) bolts. This will not only make removal easier and safer but will also allow you to tighten them to the specified torque.

Simon

8th June 2021, 11:45	#3
SD1too Doesn't do things by halves Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007 Location: Former Middlesex Posts: 20,368 Thanks: 1,587 Thanked 3,749 Times in 3,181 Posts	Hi Billy, I had trouble with one of my anti-roll bar bush screws (with the tiny 10mm AF heads). What you need is Irwin bolt extractors. Don't give up on what you're doing. Once the ARB is out of the way you'll be able to use a socket on both lower arm (it's not a wishbone!) bolts. This will not only make removal easier and safer but will also allow you to tighten them to the specified torque. Simon __________________ "Whatever is rightly done, however humble, is noble." Sir Henry Royce.