I am a bit bamboozled.
With car and caravan connected and ignition off, caravan lights stayed on.
Started engine and after a while caravan lights went off
Stopped engine and after a while the caravan lights came back on
The orange which should be pin 9 seems permanent live, the red/white which should be pin 10 seems to be "ignition" live. This is as per my table but the colours I mention are not Lunar colours but those of my 12 core cable.
I need to check the 13 pin plug to see if I reversed the two wires above when I put the new 12 core into the new plug, if I did, then I have corrected a reversal put on 9 and 10 when the caravan was made and why it all now seems to work as it should
macafee2
|