Quote:
Originally Posted by Robti
Have you a link to the ISO adaptor for this ?
Thanks
|
These units have the after-market 20pin plug connection, the unit will come with its own ISO loom with bare-wires at one end.
You will need...
Rover/BMW PC2-05-4 harness.
1: You will need to cut off the twin 'male' ISO plug end, keeping the 13/17pin BMW 'male' plug.
2: You will then need to join the corresponding colour cut wires to the already supplied DD lead using bullet connectors, or something similar.
3: Then just plug-in the 'male' 13/17pin Rover BMW plug into your cars 13/17pin 'female' harness plug.
OR... THIS...
I'm not 100% sure this has the correct 20pin plug, but it looks like it does. You will have to check the coloured wires to make sure all matches etc. The Rover/BMW PC2-05-4 lead would then just plug into the twin 'female' ISO plug end, and then into the cars original 13/17pin 'male' harness. You may still need to adapt the harness to accommodate the reverse camera and steering wheel controls, or just simply wire direct to the DD supplied loom.