Quote:
Originally Posted by FantasticMrFish
- - - I had dislodged the bigger oring inside the filter housing. I'm guessing I did that during the first disassembly as it hasn't rectified the situation but at least it's back in place now.
|
If that's the case, renew the o-ring. Once these old o-rings are moved from their original position, there's more than an even chance they won't re-seal. I had exactly this issue when I first fitted the FOC. Everything back together after I'd 'checked' inside the filter, which takes the pressure off the o-ring. It was age-hardened/set and simply wouldn't re-seal. So, back to square one - which is more or less where you seem to be. Someone recently posted an eBay link for new o-rings. Good luck
TC