Bleeding.......even easier
once everything is connected back up, starting with the NS/R connect your clear bleed pipe and run it into a clear jar placed higer than the bleed screw.
Top up the master cylinder, open the bleed nipple and wait.......gravity will push out the air, and once the bubbles stop, nip up the bleed nipple and repeat on the OS/R.
Make sure the level doesn't drop below the minimum level in the master, and you will be fine.......no air, no pumping the pedal, no fuss and minimum effort
Partial bleeding in this manner is fine when fluid loss has been minimised in the first instance, and is perfectly safe
Brian