[Blink]

Originally Posted by marinabrian

Bleeding.......even easier once everything is connected back up, starting with the NS/R connect your clear bleed pipe and run it into a clear jar placed higher than the bleed screw.

Top up the master cylinder, open the bleed nipple and wait.......gravity will push out the air, and once the bubbles stop, nip up the bleed nipple and repeat on the OS/R.

Make sure the level doesn't drop below the minimum level in the master, and you will be fine.......no air, no pumping the pedal, no fuss and minimum effort

Partial bleeding in this manner is fine when fluid loss has been minimised in the first instance, and is perfectly safe

Brian

I do like the sound of this method Brian - no work at all. I'll definitely give this one a go. How much fluid do you put in the jar to start with?