The 75 and ZT Owners Club Forums - View Single Post

Lovel · 17th August 2019, 10:50

A sad indictment on our throw away society.

Secondhand KV6 manifolds are out there if you shop around £100 upwards. Plus approx 1 hour labour to fit. You may also have to replace the VIS motors on the manifold so allow approx £100 for a pair of VIS motors too (actually they can normally be repaired as per suzublu post for much less, but it depends on your technical abilities).

Same manifold is also fitted to the Freelander V6, so search breakers for these too.

Some folks have opened up the KV6 manifold and removed the noisy internals, however this is not for the faint hearted, and there is a question on the power and efficiency once removed.

https://the75andztclub.co.uk/forum/s...Inlet+manifold

https://www.island-4x4.co.uk/inlet-m...1l-p-6835.html

https://www.devon4x4.com/lkb108021l-...ld-189455.html

17th August 2019, 10:50	#3
Lovel I really should get out more....... P6B, L550, Imp, F56, Commando Join Date: Nov 2006 Location: Aberdeenshire Posts: 2,886 Thanks: 352 Thanked 677 Times in 440 Posts	A sad indictment on our throw away society. Secondhand KV6 manifolds are out there if you shop around £100 upwards. Plus approx 1 hour labour to fit. You may also have to replace the VIS motors on the manifold so allow approx £100 for a pair of VIS motors too (actually they can normally be repaired as per suzublu post for much less, but it depends on your technical abilities). Same manifold is also fitted to the Freelander V6, so search breakers for these too. Some folks have opened up the KV6 manifold and removed the noisy internals, however this is not for the faint hearted, and there is a question on the power and efficiency once removed. https://the75andztclub.co.uk/forum/s...Inlet+manifold https://www.island-4x4.co.uk/inlet-m...1l-p-6835.html https://www.devon4x4.com/lkb108021l-...ld-189455.html Last edited by Lovel; 17th August 2019 at 11:05..