View Single Post
Old 3rd August 2017, 20:46   #1
Radioguy
Banned
 
None

Join Date: Feb 2010
Location: Here on the Forum
Posts: 5,352
Thanks: 632
Thanked 822 Times in 573 Posts
Default NAvall Comet Head Units Advise and support thread

Hello All, Now that the Comets are arriving the true tests, the customer feedback, is coming in and so far seems very good.

As always , I hope that we can all share experiences and discoveries that will help each other.

So far , this has been the feedback and niggles that we received
thanks to Mike and Coolcat for their input.

1. If using both DAB and Front DVR both work with the DAB plugged into USB and the camera plugged into 3G, just thought I would let you know to save any customer confusion over the labeling !

2. The main power loom (provided with the Comet) is wired completely differently to ALL other Navall products so PLEASE do NOT use the old one (which will actually fit.)

3. Steering wheel control cable , on the comet power cable , there is a Key 1 brown and key ground to the blue/orange and blue/purple wires.

4. Reverse light signal (Trigger wire) for rear camera. The Comet has a REV1 and a REV2 but signal is connected to REV 1

5. When tuning FM make sure that AF TA or PTY are not selected as this reduces the stations found on first scan

6. Factory settings you need it to change some basic things like boot logo – Password is 126

7. Manual can be accessed here CLICK HERE

Last edited by Radioguy; 4th August 2017 at 16:57.. Reason: Correct
Radioguy is offline   Reply With Quote