Thread: Phone MUTE
View Single Post
Old 17th March 2012, 14:54   #8
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,751
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default symhony radio phone mute

HI
This is where i stood before i got the great help from Mark (MN190) whom gave me a link to help out with the wire i needed to remove to make the symhony work while i was on the move this lead me to a link which brought on board Dave (R D 1057) whom gave me another link to the wiring i remove which is number one ( Red & Green Wire)on some cars but not on my 2004 Tourer it is No still but the colour is grey & Green Thank you both and every member whom takes time out to add these great bits of info to the site this site is fantastic we can now listen to the radio while traveling to the meet in the morning in our little convoy.


These photo's are from the Alpine changer i have and the wiring is different to the wiring in my Tourer 04 plate , No 1 wire on this is Red & Green but No 1 on the Tourer is Grey & Green
1
No 2 orange & Blue
2
No 4 is Purple
3

4


This photo is the ISO from the Tourer No 1 wire is Grey & Green
5

You can see from this photo that the odd numbers are at the bottom of the plug and evens at the top i had to remove the wire from No 1 and the phone mute was removed and i can use the radio i have not checked if it is talking to the changer but i have a feeling it wont be i wll check that another day.
6

To get the wire out of the Grey ISO block you will need a small screw driver and a paper clip in the sdie of the grey block you will see a yellow connector restraint running through the wiring connectors in the plug.fig 1
1

prise the yellow restraint up with the screw driver and remove from block fig 2
2

Next use the paper clip to remove the wiring contact from the block in hole No 1 by pushing it in and releasing the barb fig 3
3

This will allow the wire to be removed easily fron the rear of the grey ISO block this then can be taped up and is not used figs 4/5
4

5

In the above photos the wire is Red & Green on my Tourer it was Grey & Green once i had done this the radio worked on the move i now have to make my mind up if i want to change the CD changer or find a connector which will allow my original changer talk to the symphony thank you for all the help Arctic.

All the above can also be found in the links from Dave (R D 1057) whom with out his help along with Mark (M N 190) i would not have a working radio to travel to our meet tomorrow
http://www.the75andztclub.co.uk/foru...0&postcount=17

http://www.the75andztclub.co.uk/foru...21&postcount=2

http://www.the75andztclub.co.uk/foru...8&d=1199476749
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "

Last edited by Arctic; 17th March 2012 at 22:43.. Reason: Adding pictures
Arctic is offline   Reply With Quote