Driveshaft o/s - support bearing bracket
Does anyone know the best way to strip, clean and grease what Haynes calls the "support bearing bracket" on the o/s drivers side driveshaft? I notice a big strong circlip that may not be easy to get at with a pliers. I want to check I can easily reassemble.
I aim to not disturb the inner and outer cv. I have a driveshaft from the breakers and flushed the support bearing with penetrating oil and then engine oil to get it moving. But it needs a strip and clean and new grease.
On the old driveshaft (on a manual CDTi) the bearing seems to have gone wrong, lots of play and moves along the driveshaft and I was getting a worn wheel bearing sound from that centre area when driving.
|