Quote:
Originally Posted by macafee2
The bolt you put the spanner on to remove tension can sometimes turn so you cant take the tension off the belt. You will need to put a spanner on the other side of the pulley to tighten it up so you can take the tension off
macafee2
|
May need to change that pulley and studying the drawings linked below and photos wondering if its the same as the idler pulley meaning a No5 from the drawing will fit on it if theres room to pull it off , never had them in hand to see but spec says its same diameter.
https://rimmerbros.com/Item--i-GRID001734
EDIT
OK no maybe not looking at arctic's photos they not exactly same type... :-(
__________________
ZT-T Mk2 Jobs to do:
Renew auxiliary drive belt # Replace driver door lock actuator # Refurbish wheels
Last edited by Retap; 21st October 2020 at 20:52..
|