Quote:
Originally Posted by Animesis
Put the front of the car up on blocks and ran the engine in gear, and the o/sis definitely having a good rumble, n/s isnt. The ABS light came on for a bit today after that -went out now- I do wonder if the/a knackered bearing is messing around with the ABS and caused it to brake on that wheel
Any way to check the CV joint? there doesnt seem to be any play in it and the gaiter is in good condition
|
ABS malfunction could make a horrible grinding noise, you should be able to feel it through the pedal in any case . It would not always bring the light on as the system is doing what it thinks it should.
Test the drive-shafts by slow tight-full lock- figure of eights in an empty parking lot.
__________________
Chrome skull caps, EGR cleaned (original housing), Mondeo lower mounting, 12V outlets in the armrest and tourer boot, cat fixed, working FBH, Lidl plenum covers, DD with reverse camera.New speakesr/Tweeters with MDF rings. wood dash, Memory leather seats, wooden finished steering and handbrake, Xenon headlights.
|