The 75 and ZT Owners Club Forums - View Single Post

Mike Trident · 17th August 2022, 07:11

https://flic.kr/p/2nCFtfa

https://flic.kr/p/2nCFwU3

I had one fitted by Tony Banks to my diesel a couple of weeks ago. I wanted the tailpipes to show so I cut out the bumper to look like an MG. I'm very impressed, the car runs smoother than it's ever done, a bit livelier too. I like the polished tailpipes on my Rover. It's hard to see on these photos but the MG trim is also polished to a chrome finish, it's made of stainless, so a good sand with a wet and dry paper, then move onto metal polish will get a really shiny finish.

17th August 2022, 07:11	#5
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,624 Thanks: 385 Thanked 552 Times in 328 Posts	https://flic.kr/p/2nCFtfa https://flic.kr/p/2nCFwU3 I had one fitted by Tony Banks to my diesel a couple of weeks ago. I wanted the tailpipes to show so I cut out the bumper to look like an MG. I'm very impressed, the car runs smoother than it's ever done, a bit livelier too. I like the polished tailpipes on my Rover. It's hard to see on these photos but the MG trim is also polished to a chrome finish, it's made of stainless, so a good sand with a wet and dry paper, then move onto metal polish will get a really shiny finish. __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s Last edited by Mike Trident; 17th August 2022 at 07:17..