Quote:
Originally Posted by Patnut
Thanks guys do you know if its hard to get to? I was told the manifold needs to come off?
Any garages you could recommend im based in London?
Thanks
Sent from my Mi 9T Pro using Tapatalk
|
Odds on that no-one has removed the manifold to fit the jubilee clips
This may suggest that it can be done in place. Why not give it a try before attempting anything on the manifold . Disturbing a manifold is the last thing I would try especially on a V. If taking the manifold off make sure you use a gas torch or induction coil thingy, if you try to back off the nuts on any of the joints without then be prepared for shearing them. The manifold face at the cylinder head is usually ok breaking out , either the stud comes out or the nut backs off.