Quote:
Originally Posted by Sonic ZS
I replaced the HG on a TF a couple years ago, liner heights were all about 1 thou proud of the block, with negligible difference between adjoining liners.
Head had recently been skimmed to it's limit, but with no indents from the previous gasket (guess I was lucky ).
I used a genuine Payen elastomer gasket, new bolts, etc. and it's been fine so far (approx 8000 miles) and doesn't use any coolant.
Also fully flushed and now using green anti-freeze with low level warning.....just in case !
|
Seems your cylinder head was fit for purpose, thats why it works
(no indents)