Quote:
Originally Posted by EastPete
Try a bit of grease on the metal balls, and the cable ends should then just push on without too much trouble. Make sure the outer cable ends are seated properly in the support brackets on the gearbox - I clean these up and put a bit of grease on the brackets to help the outer cables slip into place.
Pete
|
Thanks Pete, as I was having so much trouble I got on with everything else and the only thing is to get the sockets to fit onto the ball itself. I had greased all and will have another go, probably tomorrow. The area is so tight it's difficult to get any tools in there to help.
Thanks.